From 84e41104845e80a429d6ac983a45de69dd71ecb1 Mon Sep 17 00:00:00 2001
From: "ctrlaltca@gmail.com" <>
Date: Sat, 11 Feb 2012 09:09:30 +0000
Subject: cleaning away unused converters from phpDocumentor
---
.../Converters/PDF/default/class.ezpdf.php | 1571 --------------------
1 file changed, 1571 deletions(-)
delete mode 100755 buildscripts/PhpDocumentor/phpDocumentor/Converters/PDF/default/class.ezpdf.php
(limited to 'buildscripts/PhpDocumentor/phpDocumentor/Converters/PDF/default/class.ezpdf.php')
diff --git a/buildscripts/PhpDocumentor/phpDocumentor/Converters/PDF/default/class.ezpdf.php b/buildscripts/PhpDocumentor/phpDocumentor/Converters/PDF/default/class.ezpdf.php
deleted file mode 100755
index f94fe330..00000000
--- a/buildscripts/PhpDocumentor/phpDocumentor/Converters/PDF/default/class.ezpdf.php
+++ /dev/null
@@ -1,1571 +0,0 @@
-10); // used for storing most of the page configuration parameters
-var $y; // this is the current vertical positon on the page of the writing point, very important
-var $ezPages=array(); // keep an array of the ids of the pages, making it easy to go back and add page numbers etc.
-var $ezPageCount=0;
-
-// ------------------------------------------------------------------------------
-
-function Cezpdf($paper='a4',$orientation='portrait'){
- // Assuming that people don't want to specify the paper size using the absolute coordinates
- // allow a couple of options:
- // orientation can be 'portrait' or 'landscape'
- // or, to actually set the coordinates, then pass an array in as the first parameter.
- // the defaults are as shown.
- //
- // -------------------------
- // 2002-07-24 - Nicola Asuni (info@tecnick.com):
- // Added new page formats (45 standard ISO paper formats and 4 american common formats)
- // paper cordinates are calculated in this way: (inches * 72) where 1 inch = 2.54 cm
- //
- // Now you may also pass a 2 values array containing the page width and height in centimeters
- // -------------------------
-
- if (!is_array($paper)){
- switch (strtoupper($paper)){
- case '4A0': {$size = array(0,0,4767.87,6740.79); break;}
- case '2A0': {$size = array(0,0,3370.39,4767.87); break;}
- case 'A0': {$size = array(0,0,2383.94,3370.39); break;}
- case 'A1': {$size = array(0,0,1683.78,2383.94); break;}
- case 'A2': {$size = array(0,0,1190.55,1683.78); break;}
- case 'A3': {$size = array(0,0,841.89,1190.55); break;}
- case 'A4': default: {$size = array(0,0,595.28,841.89); break;}
- case 'A5': {$size = array(0,0,419.53,595.28); break;}
- case 'A6': {$size = array(0,0,297.64,419.53); break;}
- case 'A7': {$size = array(0,0,209.76,297.64); break;}
- case 'A8': {$size = array(0,0,147.40,209.76); break;}
- case 'A9': {$size = array(0,0,104.88,147.40); break;}
- case 'A10': {$size = array(0,0,73.70,104.88); break;}
- case 'B0': {$size = array(0,0,2834.65,4008.19); break;}
- case 'B1': {$size = array(0,0,2004.09,2834.65); break;}
- case 'B2': {$size = array(0,0,1417.32,2004.09); break;}
- case 'B3': {$size = array(0,0,1000.63,1417.32); break;}
- case 'B4': {$size = array(0,0,708.66,1000.63); break;}
- case 'B5': {$size = array(0,0,498.90,708.66); break;}
- case 'B6': {$size = array(0,0,354.33,498.90); break;}
- case 'B7': {$size = array(0,0,249.45,354.33); break;}
- case 'B8': {$size = array(0,0,175.75,249.45); break;}
- case 'B9': {$size = array(0,0,124.72,175.75); break;}
- case 'B10': {$size = array(0,0,87.87,124.72); break;}
- case 'C0': {$size = array(0,0,2599.37,3676.54); break;}
- case 'C1': {$size = array(0,0,1836.85,2599.37); break;}
- case 'C2': {$size = array(0,0,1298.27,1836.85); break;}
- case 'C3': {$size = array(0,0,918.43,1298.27); break;}
- case 'C4': {$size = array(0,0,649.13,918.43); break;}
- case 'C5': {$size = array(0,0,459.21,649.13); break;}
- case 'C6': {$size = array(0,0,323.15,459.21); break;}
- case 'C7': {$size = array(0,0,229.61,323.15); break;}
- case 'C8': {$size = array(0,0,161.57,229.61); break;}
- case 'C9': {$size = array(0,0,113.39,161.57); break;}
- case 'C10': {$size = array(0,0,79.37,113.39); break;}
- case 'RA0': {$size = array(0,0,2437.80,3458.27); break;}
- case 'RA1': {$size = array(0,0,1729.13,2437.80); break;}
- case 'RA2': {$size = array(0,0,1218.90,1729.13); break;}
- case 'RA3': {$size = array(0,0,864.57,1218.90); break;}
- case 'RA4': {$size = array(0,0,609.45,864.57); break;}
- case 'SRA0': {$size = array(0,0,2551.18,3628.35); break;}
- case 'SRA1': {$size = array(0,0,1814.17,2551.18); break;}
- case 'SRA2': {$size = array(0,0,1275.59,1814.17); break;}
- case 'SRA3': {$size = array(0,0,907.09,1275.59); break;}
- case 'SRA4': {$size = array(0,0,637.80,907.09); break;}
- case 'LETTER': {$size = array(0,0,612.00,792.00); break;}
- case 'LEGAL': {$size = array(0,0,612.00,1008.00); break;}
- case 'EXECUTIVE': {$size = array(0,0,521.86,756.00); break;}
- case 'FOLIO': {$size = array(0,0,612.00,936.00); break;}
- }
- switch (strtolower($orientation)){
- case 'landscape':
- $a=$size[3];
- $size[3]=$size[2];
- $size[2]=$a;
- break;
- }
- } else {
- if (count($paper)>2) {
- // then an array was sent it to set the size
- $size = $paper;
- }
- else { //size in centimeters has been passed
- $size[0] = 0;
- $size[1] = 0;
- $size[2] = ( $paper[0] / 2.54 ) * 72;
- $size[3] = ( $paper[1] / 2.54 ) * 72;
- }
- }
- $this->Cpdf($size);
- $this->ez['pageWidth']=$size[2];
- $this->ez['pageHeight']=$size[3];
-
- // also set the margins to some reasonable defaults
- $this->ez['topMargin']=30;
- $this->ez['bottomMargin']=30;
- $this->ez['leftMargin']=30;
- $this->ez['rightMargin']=30;
-
- // set the current writing position to the top of the first page
- $this->y = $this->ez['pageHeight']-$this->ez['topMargin'];
- // and get the ID of the page that was created during the instancing process.
- $this->ezPages[1]=$this->getFirstPageId();
- $this->ezPageCount=1;
-}
-
-// ------------------------------------------------------------------------------
-// 2002-07-24: Nicola Asuni (info@tecnick.com)
-// Set Margins in centimeters
-function ezSetCmMargins($top,$bottom,$left,$right){
- $top = ( $top / 2.54 ) * 72;
- $bottom = ( $bottom / 2.54 ) * 72;
- $left = ( $left / 2.54 ) * 72;
- $right = ( $right / 2.54 ) * 72;
- $this->ezSetMargins($top,$bottom,$left,$right);
-}
-// ------------------------------------------------------------------------------
-
-
-function ezColumnsStart($options=array()){
- // start from the current y-position, make the set number of columne
- if (isset($this->ez['columns']) && $this->ez['columns']==1){
- // if we are already in a column mode then just return.
- return;
- }
- $def=array('gap'=>10,'num'=>2);
- foreach($def as $k=>$v){
- if (!isset($options[$k])){
- $options[$k]=$v;
- }
- }
- // setup the columns
- $this->ez['columns']=array('on'=>1,'colNum'=>1);
-
- // store the current margins
- $this->ez['columns']['margins']=array(
- $this->ez['leftMargin']
- ,$this->ez['rightMargin']
- ,$this->ez['topMargin']
- ,$this->ez['bottomMargin']
- );
- // and store the settings for the columns
- $this->ez['columns']['options']=$options;
- // then reset the margins to suit the new columns
- // safe enough to assume the first column here, but start from the current y-position
- $this->ez['topMargin']=$this->ez['pageHeight']-$this->y;
- $width=($this->ez['pageWidth']-$this->ez['leftMargin']-$this->ez['rightMargin']-($options['num']-1)*$options['gap'])/$options['num'];
- $this->ez['columns']['width']=$width;
- $this->ez['rightMargin']=$this->ez['pageWidth']-$this->ez['leftMargin']-$width;
-
-}
-// ------------------------------------------------------------------------------
-function ezColumnsStop(){
- if (isset($this->ez['columns']) && $this->ez['columns']['on']==1){
- $this->ez['columns']['on']=0;
- $this->ez['leftMargin']=$this->ez['columns']['margins'][0];
- $this->ez['rightMargin']=$this->ez['columns']['margins'][1];
- $this->ez['topMargin']=$this->ez['columns']['margins'][2];
- $this->ez['bottomMargin']=$this->ez['columns']['margins'][3];
- }
-}
-// ------------------------------------------------------------------------------
-function ezInsertMode($status=1,$pageNum=1,$pos='before'){
- // puts the document into insert mode. new pages are inserted until this is re-called with status=0
- // by default pages wil be inserted at the start of the document
- switch($status){
- case '1':
- if (isset($this->ezPages[$pageNum])){
- $this->ez['insertMode']=1;
- $this->ez['insertOptions']=array('id'=>$this->ezPages[$pageNum],'pos'=>$pos);
- }
- break;
- case '0':
- $this->ez['insertMode']=0;
- break;
- }
-}
-// ------------------------------------------------------------------------------
-
-function ezNewPage(){
- $pageRequired=1;
- if (isset($this->ez['columns']) && $this->ez['columns']['on']==1){
- // check if this is just going to a new column
- // increment the column number
-//echo 'HERE
';
- $this->ez['columns']['colNum']++;
-//echo $this->ez['columns']['colNum'].'
';
- if ($this->ez['columns']['colNum'] <= $this->ez['columns']['options']['num']){
- // then just reset to the top of the next column
- $pageRequired=0;
- } else {
- $this->ez['columns']['colNum']=1;
- $this->ez['topMargin']=$this->ez['columns']['margins'][2];
- }
-
- $width = $this->ez['columns']['width'];
- $this->ez['leftMargin']=$this->ez['columns']['margins'][0]+($this->ez['columns']['colNum']-1)*($this->ez['columns']['options']['gap']+$width);
- $this->ez['rightMargin']=$this->ez['pageWidth']-$this->ez['leftMargin']-$width;
- }
-//echo 'left='.$this->ez['leftMargin'].' right='.$this->ez['rightMargin'].'
';
-
- if ($pageRequired){
- // make a new page, setting the writing point back to the top
- $this->y = $this->ez['pageHeight']-$this->ez['topMargin'];
- // make the new page with a call to the basic class.
- $this->ezPageCount++;
- if (isset($this->ez['insertMode']) && $this->ez['insertMode']==1){
- $id = $this->ezPages[$this->ezPageCount] = $this->newPage(1,$this->ez['insertOptions']['id'],$this->ez['insertOptions']['pos']);
- // then manipulate the insert options so that inserted pages follow each other
- $this->ez['insertOptions']['id']=$id;
- $this->ez['insertOptions']['pos']='after';
- } else {
- $this->ezPages[$this->ezPageCount] = $this->newPage();
- }
- } else {
- $this->y = $this->ez['pageHeight']-$this->ez['topMargin'];
- }
-}
-
-// ------------------------------------------------------------------------------
-
-function ezSetMargins($top,$bottom,$left,$right){
- // sets the margins to new values
- $this->ez['topMargin']=$top;
- $this->ez['bottomMargin']=$bottom;
- $this->ez['leftMargin']=$left;
- $this->ez['rightMargin']=$right;
- // check to see if this means that the current writing position is outside the
- // writable area
- if ($this->y > $this->ez['pageHeight']-$top){
- // then move y down
- $this->y = $this->ez['pageHeight']-$top;
- }
- if ( $this->y < $bottom){
- // then make a new page
- $this->ezNewPage();
- }
-}
-
-// ------------------------------------------------------------------------------
-
-function ezGetCurrentPageNumber(){
- // return the strict numbering (1,2,3,4..) number of the current page
- return $this->ezPageCount;
-}
-
-// ------------------------------------------------------------------------------
-
-function ezStartPageNumbers($x,$y,$size,$pos='left',$pattern='{PAGENUM} of {TOTALPAGENUM}',$num=''){
- // put page numbers on the pages from here.
- // place then on the 'pos' side of the coordinates (x,y).
- // pos can be 'left' or 'right'
- // use the given 'pattern' for display, where (PAGENUM} and {TOTALPAGENUM} are replaced
- // as required.
- // if $num is set, then make the first page this number, the number of total pages will
- // be adjusted to account for this.
- // Adjust this function so that each time you 'start' page numbers then you effectively start a different batch
- // return the number of the batch, so that they can be stopped in a different order if required.
- if (!$pos || !strlen($pos)){
- $pos='left';
- }
- if (!$pattern || !strlen($pattern)){
- $pattern='{PAGENUM} of {TOTALPAGENUM}';
- }
- if (!isset($this->ez['pageNumbering'])){
- $this->ez['pageNumbering']=array();
- }
- $i = count($this->ez['pageNumbering']);
- $this->ez['pageNumbering'][$i][$this->ezPageCount]=array('x'=>$x,'y'=>$y,'pos'=>$pos,'pattern'=>$pattern,'num'=>$num,'size'=>$size);
- return $i;
-}
-
-// ------------------------------------------------------------------------------
-
-function ezWhatPageNumber($pageNum,$i=0){
- // given a particular generic page number (ie, document numbered sequentially from beginning),
- // return the page number under a particular page numbering scheme ($i)
- $num=0;
- $start=1;
- $startNum=1;
- if (!isset($this->ez['pageNumbering']))
- {
- $this->addMessage('WARNING: page numbering called for and wasn\'t started with ezStartPageNumbers');
- return 0;
- }
- foreach($this->ez['pageNumbering'][$i] as $k=>$v){
- if ($k<=$pageNum){
- if (is_array($v)){
- // start block
- if (strlen($v['num'])){
- // a start was specified
- $start=$v['num'];
- $startNum=$k;
- $num=$pageNum-$startNum+$start;
- }
- } else {
- // stop block
- $num=0;
- }
- }
- }
- return $num;
-}
-
-// ------------------------------------------------------------------------------
-
-function ezStopPageNumbers($stopTotal=0,$next=0,$i=0){
- // if stopTotal=1 then the totalling of pages for this number will stop too
- // if $next=1, then do this page, but not the next, else do not do this page either
- // if $i is set, then stop that particular pagenumbering sequence.
- if (!isset($this->ez['pageNumbering'])){
- $this->ez['pageNumbering']=array();
- }
- if ($next && isset($this->ez['pageNumbering'][$i][$this->ezPageCount]) && is_array($this->ez['pageNumbering'][$i][$this->ezPageCount])){
- // then this has only just been started, this will over-write the start, and nothing will appear
- // add a special command to the start block, telling it to stop as well
- if ($stopTotal){
- $this->ez['pageNumbering'][$i][$this->ezPageCount]['stoptn']=1;
- } else {
- $this->ez['pageNumbering'][$i][$this->ezPageCount]['stopn']=1;
- }
- } else {
- if ($stopTotal){
- $this->ez['pageNumbering'][$i][$this->ezPageCount]='stopt';
- } else {
- $this->ez['pageNumbering'][$i][$this->ezPageCount]='stop';
- }
- if ($next){
- $this->ez['pageNumbering'][$i][$this->ezPageCount].='n';
- }
- }
-}
-
-// ------------------------------------------------------------------------------
-
-function ezPRVTpageNumberSearch($lbl,&$tmp){
- foreach($tmp as $i=>$v){
- if (is_array($v)){
- if (isset($v[$lbl])){
- return $i;
- }
- } else {
- if ($v==$lbl){
- return $i;
- }
- }
- }
- return 0;
-}
-
-// ------------------------------------------------------------------------------
-
-function ezPRVTaddPageNumbers(){
- // this will go through the pageNumbering array and add the page numbers are required
- if (isset($this->ez['pageNumbering'])){
- $totalPages1 = $this->ezPageCount;
- $tmp1=$this->ez['pageNumbering'];
- $status=0;
- foreach($tmp1 as $i=>$tmp){
- // do each of the page numbering systems
- // firstly, find the total pages for this one
- $k = $this->ezPRVTpageNumberSearch('stopt',$tmp);
- if ($k && $k>0){
- $totalPages = $k-1;
- } else {
- $l = $this->ezPRVTpageNumberSearch('stoptn',$tmp);
- if ($l && $l>0){
- $totalPages = $l;
- } else {
- $totalPages = $totalPages1;
- }
- }
- foreach ($this->ezPages as $pageNum=>$id){
- if (isset($tmp[$pageNum])){
- if (is_array($tmp[$pageNum])){
- // then this must be starting page numbers
- $status=1;
- $info = $tmp[$pageNum];
- $info['dnum']=$info['num']-$pageNum;
- // also check for the special case of the numbering stopping and starting on the same page
- if (isset($info['stopn']) || isset($info['stoptn']) ){
- $status=2;
- }
- } else if ($tmp[$pageNum]=='stop' || $tmp[$pageNum]=='stopt'){
- // then we are stopping page numbers
- $status=0;
- } else if ($status==1 && ($tmp[$pageNum]=='stoptn' || $tmp[$pageNum]=='stopn')){
- // then we are stopping page numbers
- $status=2;
- }
- }
- if ($status){
- // then add the page numbering to this page
- if (strlen($info['num'])){
- $num=$pageNum+$info['dnum'];
- } else {
- $num=$pageNum;
- }
- $total = $totalPages+$num-$pageNum;
- $pat = str_replace('{PAGENUM}',$num,$info['pattern']);
- $pat = str_replace('{TOTALPAGENUM}',$total,$pat);
- $this->reopenObject($id);
- switch($info['pos']){
- case 'right':
- $this->addText($info['x'],$info['y'],$info['size'],$pat);
- break;
- default:
- $w=$this->getTextWidth($info['size'],$pat);
- $this->addText($info['x']-$w,$info['y'],$info['size'],$pat);
- break;
- }
- $this->closeObject();
- }
- if ($status==2){
- $status=0;
- }
- }
- }
- }
-}
-
-// ------------------------------------------------------------------------------
-
-function ezPRVTcleanUp(){
- $this->ezPRVTaddPageNumbers();
-}
-
-// ------------------------------------------------------------------------------
-
-function ezStream($options=''){
- $this->ezPRVTcleanUp();
- $this->stream($options);
-}
-
-// ------------------------------------------------------------------------------
-
-function ezOutput($options=0){
- $this->ezPRVTcleanUp();
- return $this->output($options);
-}
-
-// ------------------------------------------------------------------------------
-
-function ezSetY($y){
- // used to change the vertical position of the writing point.
- $this->y = $y;
- if ( $this->y < $this->ez['bottomMargin']){
- // then make a new page
- $this->ezNewPage();
- }
-}
-
-// ------------------------------------------------------------------------------
-
-function ezSetDy($dy,$mod=''){
- // used to change the vertical position of the writing point.
- // changes up by a positive increment, so enter a negative number to go
- // down the page
- // if $mod is set to 'makeSpace' and a new page is forced, then the pointed will be moved
- // down on the new page, this will allow space to be reserved for graphics etc.
- $this->y += $dy;
- if ( $this->y < $this->ez['bottomMargin']){
- // then make a new page
- $this->ezNewPage();
- if ($mod=='makeSpace'){
- $this->y += $dy;
- }
- }
-}
-
-// ------------------------------------------------------------------------------
-
-function ezPrvtTableDrawLines($pos,$gap,$x0,$x1,$y0,$y1,$y2,$col,$inner,$outer,$opt=1){
- $x0=1000;
- $x1=0;
- $this->setStrokeColor($col[0],$col[1],$col[2]);
- $cnt=0;
- $n = count($pos);
- foreach($pos as $x){
- $cnt++;
- if ($cnt==1 || $cnt==$n){
- $this->setLineStyle($outer);
- } else {
- $this->setLineStyle($inner);
- }
- $this->line($x-$gap/2,$y0,$x-$gap/2,$y2);
- if ($x>$x1){ $x1=$x; };
- if ($x<$x0){ $x0=$x; };
- }
- $this->setLineStyle($outer);
- $this->line($x0-$gap/2-$outer/2,$y0,$x1-$gap/2+$outer/2,$y0);
- // only do the second line if it is different to the first, AND each row does not have
- // a line on it.
- if ($y0!=$y1 && $opt<2){
- $this->line($x0-$gap/2,$y1,$x1-$gap/2,$y1);
- }
- $this->line($x0-$gap/2-$outer/2,$y2,$x1-$gap/2+$outer/2,$y2);
-}
-
-// ------------------------------------------------------------------------------
-
-function ezPrvtTableColumnHeadings($cols,$pos,$maxWidth,$height,$decender,$gap,$size,&$y,$optionsAll=array()){
- // uses ezText to add the text, and returns the height taken by the largest heading
- // this page will move the headings to a new page if they will not fit completely on this one
- // transaction support will be used to implement this
-
- if (isset($optionsAll['cols'])){
- $options = $optionsAll['cols'];
- } else {
- $options = array();
- }
-
- $mx=0;
- $startPage = $this->ezPageCount;
- $secondGo=0;
-
- // $y is the position at which the top of the table should start, so the base
- // of the first text, is $y-$height-$gap-$decender, but ezText starts by dropping $height
-
- // the return from this function is the total cell height, including gaps, and $y is adjusted
- // to be the postion of the bottom line
-
- // begin the transaction
- $this->transaction('start');
- $ok=0;
-// $y-=$gap-$decender;
- $y-=$gap;
- while ($ok==0){
- foreach($cols as $colName=>$colHeading){
- $this->ezSetY($y);
- if (isset($options[$colName]) && isset($options[$colName]['justification'])){
- $justification = $options[$colName]['justification'];
- } else {
- $justification = 'left';
- }
- $this->ezText($colHeading,$size,array('aleft'=> $pos[$colName],'aright'=>($maxWidth[$colName]+$pos[$colName]),'justification'=>$justification));
- $dy = $y-$this->y;
- if ($dy>$mx){
- $mx=$dy;
- }
- }
- $y = $y - $mx - $gap + $decender;
-// $y -= $mx-$gap+$decender;
-
- // now, if this has moved to a new page, then abort the transaction, move to a new page, and put it there
- // do not check on the second time around, to avoid an infinite loop
- if ($this->ezPageCount != $startPage && $secondGo==0){
- $this->transaction('rewind');
- $this->ezNewPage();
- $y = $this->y - $gap-$decender;
- $ok=0;
- $secondGo=1;
-// $y = $store_y;
- $mx=0;
-
- } else {
- $this->transaction('commit');
- $ok=1;
- }
- }
-
- return $mx+$gap*2-$decender;
-}
-
-// ------------------------------------------------------------------------------
-
-function ezPrvtGetTextWidth($size,$text){
- // will calculate the maximum width, taking into account that the text may be broken
- // by line breaks.
- $mx=0;
- $lines = explode("\n",$text);
- foreach ($lines as $line){
- $w = $this->getTextWidth($size,$line);
- if ($w>$mx){
- $mx=$w;
- }
- }
- return $mx;
-}
-
-// ------------------------------------------------------------------------------
-
-function ezTable(&$data,$cols='',$title='',$options=''){
- // add a table of information to the pdf document
- // $data is a two dimensional array
- // $cols (optional) is an associative array, the keys are the names of the columns from $data
- // to be presented (and in that order), the values are the titles to be given to the columns
- // $title (optional) is the title to be put on the top of the table
- //
- // $options is an associative array which can contain:
- // 'showLines'=> 0,1,2, default is 1 (show outside and top lines only), 2=> lines on each row
- // 'showHeadings' => 0 or 1
- // 'shaded'=> 0,1,2,3 default is 1 (1->alternate lines are shaded, 0->no shading, 2-> both shaded, second uses shadeCol2)
- // 'shadeCol' => (r,g,b) array, defining the colour of the shading, default is (0.8,0.8,0.8)
- // 'shadeCol2' => (r,g,b) array, defining the colour of the shading of the other blocks, default is (0.7,0.7,0.7)
- // 'fontSize' => 10
- // 'textCol' => (r,g,b) array, text colour
- // 'titleFontSize' => 12
- // 'rowGap' => 2 , the space added at the top and bottom of each row, between the text and the lines
- // 'colGap' => 5 , the space on the left and right sides of each cell
- // 'lineCol' => (r,g,b) array, defining the colour of the lines, default, black.
- // 'xPos' => 'left','right','center','centre',or coordinate, reference coordinate in the x-direction
- // 'xOrientation' => 'left','right','center','centre', position of the table w.r.t 'xPos'
- // 'width'=> which will specify the width of the table, if it turns out to not be this
- // wide, then it will stretch the table to fit, if it is wider then each cell will be made
- // proportionalty smaller, and the content may have to wrap.
- // 'maxWidth'=> similar to 'width', but will only make table smaller than it wants to be
- // 'options' => array(=>array('justification'=>'left','width'=>100,'link'=>linkDataName),=>....)
- // allow the setting of other paramaters for the individual columns
- // 'minRowSpace'=> the minimum space between the bottom of each row and the bottom margin, in which a new row will be started
- // if it is less, then a new page would be started, default=-100
- // 'innerLineThickness'=>1
- // 'outerLineThickness'=>1
- // 'splitRows'=>0, 0 or 1, whether or not to allow the rows to be split across page boundaries
- // 'protectRows'=>number, the number of rows to hold with the heading on page, ie, if there less than this number of
- // rows on the page, then move the whole lot onto the next page, default=1
- //
- // note that the user will have had to make a font selection already or this will not
- // produce a valid pdf file.
-
- if (!is_array($data)){
- return;
- }
-
- if (!is_array($cols)){
- // take the columns from the first row of the data set
- reset($data);
- list($k,$v)=each($data);
- if (!is_array($v)){
- return;
- }
- $cols=array();
- foreach($v as $k1=>$v1){
- $cols[$k1]=$k1;
- }
- }
-
- if (!is_array($options)){
- $options=array();
- }
-
- $defaults = array(
- 'shaded'=>1,'showLines'=>1,'shadeCol'=>array(0.8,0.8,0.8),'shadeCol2'=>array(0.7,0.7,0.7),'fontSize'=>10,'titleFontSize'=>12
- ,'titleGap'=>5,'lineCol'=>array(0,0,0),'gap'=>5,'xPos'=>'centre','xOrientation'=>'centre'
- ,'showHeadings'=>1,'textCol'=>array(0,0,0),'width'=>0,'maxWidth'=>0,'cols'=>array(),'minRowSpace'=>-100,'rowGap'=>2,'colGap'=>5
- ,'innerLineThickness'=>1,'outerLineThickness'=>1,'splitRows'=>0,'protectRows'=>1
- );
-
- foreach($defaults as $key=>$value){
- if (is_array($value)){
- if (!isset($options[$key]) || !is_array($options[$key])){
- $options[$key]=$value;
- }
- } else {
- if (!isset($options[$key])){
- $options[$key]=$value;
- }
- }
- }
- $options['gap']=2*$options['colGap'];
-
- $middle = ($this->ez['pageWidth']-$this->ez['rightMargin'])/2+($this->ez['leftMargin'])/2;
- // figure out the maximum widths of the text within each column
- $maxWidth=array();
- foreach($cols as $colName=>$colHeading){
- $maxWidth[$colName]=0;
- }
- // find the maximum cell widths based on the data
- foreach($data as $row){
- foreach($cols as $colName=>$colHeading){
- $w = $this->ezPrvtGetTextWidth($options['fontSize'],(string)$row[$colName])*1.01;
- if ($w > $maxWidth[$colName]){
- $maxWidth[$colName]=$w;
- }
- }
- }
- // and the maximum widths to fit in the headings
- foreach($cols as $colName=>$colTitle){
- $w = $this->ezPrvtGetTextWidth($options['fontSize'],(string)$colTitle)*1.01;
- if ($w > $maxWidth[$colName]){
- $maxWidth[$colName]=$w;
- }
- }
-
- // calculate the start positions of each of the columns
- $pos=array();
- $x=0;
- $t=$x;
- $adjustmentWidth=0;
- $setWidth=0;
- foreach($maxWidth as $colName => $w){
- $pos[$colName]=$t;
- // if the column width has been specified then set that here, also total the
- // width avaliable for adjustment
- if (isset($options['cols'][$colName]) && isset($options['cols'][$colName]['width']) && $options['cols'][$colName]['width']>0){
- $t=$t+$options['cols'][$colName]['width'];
- $maxWidth[$colName] = $options['cols'][$colName]['width']-$options['gap'];
- $setWidth += $options['cols'][$colName]['width'];
- } else {
- $t=$t+$w+$options['gap'];
- $adjustmentWidth += $w;
- $setWidth += $options['gap'];
- }
- }
- $pos['_end_']=$t;
-
- // if maxWidth is specified, and the table is too wide, and the width has not been set,
- // then set the width.
- if ($options['width']==0 && $options['maxWidth'] && ($t-$x)>$options['maxWidth']){
- // then need to make this one smaller
- $options['width']=$options['maxWidth'];
- }
-
- if ($options['width'] && $adjustmentWidth>0 && $setWidth<$options['width']){
- // first find the current widths of the columns involved in this mystery
- $cols0 = array();
- $cols1 = array();
- $xq=0;
- $presentWidth=0;
- $last='';
- foreach($pos as $colName=>$p){
- if (!isset($options['cols'][$last]) || !isset($options['cols'][$last]['width']) || $options['cols'][$last]['width']<=0){
- if (strlen($last)){
- $cols0[$last]=$p-$xq -$options['gap'];
- $presentWidth += ($p-$xq - $options['gap']);
- }
- } else {
- $cols1[$last]=$p-$xq;
- }
- $last=$colName;
- $xq=$p;
- }
- // $cols0 contains the widths of all the columns which are not set
- $neededWidth = $options['width']-$setWidth;
- // if needed width is negative then add it equally to each column, else get more tricky
- if ($presentWidth<$neededWidth){
- foreach($cols0 as $colName=>$w){
- $cols0[$colName]+= ($neededWidth-$presentWidth)/count($cols0);
- }
- } else {
-
- $cnt=0;
- while ($presentWidth>$neededWidth && $cnt<100){
- $cnt++; // insurance policy
- // find the widest columns, and the next to widest width
- $aWidest = array();
- $nWidest=0;
- $widest=0;
- foreach($cols0 as $colName=>$w){
- if ($w>$widest){
- $aWidest=array($colName);
- $nWidest = $widest;
- $widest=$w;
- } else if ($w==$widest){
- $aWidest[]=$colName;
- }
- }
- // then figure out what the width of the widest columns would have to be to take up all the slack
- $newWidestWidth = $widest - ($presentWidth-$neededWidth)/count($aWidest);
- if ($newWidestWidth > $nWidest){
- // then there is space to set them to this
- foreach($aWidest as $colName){
- $cols0[$colName] = $newWidestWidth;
- }
- $presentWidth=$neededWidth;
- } else {
- // there is not space, reduce the size of the widest ones down to the next size down, and we
- // will go round again
- foreach($aWidest as $colName){
- $cols0[$colName] = $nWidest;
- }
- $presentWidth=$presentWidth-($widest-$nWidest)*count($aWidest);
- }
- }
- }
- // $cols0 now contains the new widths of the constrained columns.
- // now need to update the $pos and $maxWidth arrays
- $xq=0;
- foreach($pos as $colName=>$p){
- $pos[$colName]=$xq;
- if (!isset($options['cols'][$colName]) || !isset($options['cols'][$colName]['width']) || $options['cols'][$colName]['width']<=0){
- if (isset($cols0[$colName])){
- $xq += $cols0[$colName] + $options['gap'];
- $maxWidth[$colName]=$cols0[$colName];
- }
- } else {
- if (isset($cols1[$colName])){
- $xq += $cols1[$colName];
- }
- }
- }
-
- $t=$x+$options['width'];
- $pos['_end_']=$t;
- }
-
- // now adjust the table to the correct location across the page
- switch ($options['xPos']){
- case 'left':
- $xref = $this->ez['leftMargin'];
- break;
- case 'right':
- $xref = $this->ez['pageWidth'] - $this->ez['rightMargin'];
- break;
- case 'centre':
- case 'center':
- $xref = $middle;
- break;
- default:
- $xref = $options['xPos'];
- break;
- }
- switch ($options['xOrientation']){
- case 'left':
- $dx = $xref-$t;
- break;
- case 'right':
- $dx = $xref;
- break;
- case 'centre':
- case 'center':
- $dx = $xref-$t/2;
- break;
- }
-
-
- foreach($pos as $k=>$v){
- $pos[$k]=$v+$dx;
- }
- $x0=$x+$dx;
- $x1=$t+$dx;
-
- $baseLeftMargin = $this->ez['leftMargin'];
- $basePos = $pos;
- $baseX0 = $x0;
- $baseX1 = $x1;
-
- // ok, just about ready to make me a table
- $this->setColor($options['textCol'][0],$options['textCol'][1],$options['textCol'][2]);
- $this->setStrokeColor($options['shadeCol'][0],$options['shadeCol'][1],$options['shadeCol'][2]);
-
- $middle = ($x1+$x0)/2;
-
- // start a transaction which will be used to regress the table, if there are not enough rows protected
- if ($options['protectRows']>0){
- $this->transaction('start');
- $movedOnce=0;
- }
- $abortTable = 1;
- while ($abortTable){
- $abortTable=0;
-
- $dm = $this->ez['leftMargin']-$baseLeftMargin;
- foreach($basePos as $k=>$v){
- $pos[$k]=$v+$dm;
- }
- $x0=$baseX0+$dm;
- $x1=$baseX1+$dm;
- $middle = ($x1+$x0)/2;
-
-
- // if the title is set, then do that
- if (strlen($title)){
- $w = $this->getTextWidth($options['titleFontSize'],$title);
- $this->y -= $this->getFontHeight($options['titleFontSize']);
- if ($this->y < $this->ez['bottomMargin']){
- $this->ezNewPage();
- // margins may have changed on the newpage
- $dm = $this->ez['leftMargin']-$baseLeftMargin;
- foreach($basePos as $k=>$v){
- $pos[$k]=$v+$dm;
- }
- $x0=$baseX0+$dm;
- $x1=$baseX1+$dm;
- $middle = ($x1+$x0)/2;
- $this->y -= $this->getFontHeight($options['titleFontSize']);
- }
- $this->addText($middle-$w/2,$this->y,$options['titleFontSize'],$title);
- $this->y -= $options['titleGap'];
- }
-
- // margins may have changed on the newpage
- $dm = $this->ez['leftMargin']-$baseLeftMargin;
- foreach($basePos as $k=>$v){
- $pos[$k]=$v+$dm;
- }
- $x0=$baseX0+$dm;
- $x1=$baseX1+$dm;
-
- $y=$this->y; // to simplify the code a bit
-
- // make the table
- $height = $this->getFontHeight($options['fontSize']);
- $decender = $this->getFontDecender($options['fontSize']);
-
-
-
- $y0=$y+$decender;
- $dy=0;
- if ($options['showHeadings']){
- // this function will move the start of the table to a new page if it does not fit on this one
- $headingHeight = $this->ezPrvtTableColumnHeadings($cols,$pos,$maxWidth,$height,$decender,$options['rowGap'],$options['fontSize'],$y,$options);
- $y0 = $y+$headingHeight;
- $y1 = $y;
-
-
- $dm = $this->ez['leftMargin']-$baseLeftMargin;
- foreach($basePos as $k=>$v){
- $pos[$k]=$v+$dm;
- }
- $x0=$baseX0+$dm;
- $x1=$baseX1+$dm;
-
- } else {
- $y1 = $y0;
- }
- $firstLine=1;
-
-
- // open an object here so that the text can be put in over the shading
- if ($options['shaded']){
- $this->saveState();
- $textObjectId = $this->openObject();
- $this->closeObject();
- $this->addObject($textObjectId);
- $this->reopenObject($textObjectId);
- }
-
- $cnt=0;
- $newPage=0;
- foreach($data as $row){
- $cnt++;
- // the transaction support will be used to prevent rows being split
- if ($options['splitRows']==0){
- $pageStart = $this->ezPageCount;
- if (isset($this->ez['columns']) && $this->ez['columns']['on']==1){
- $columnStart = $this->ez['columns']['colNum'];
- }
- $this->transaction('start');
- $row_orig = $row;
- $y_orig = $y;
- $y0_orig = $y0;
- $y1_orig = $y1;
- }
- $ok=0;
- $secondTurn=0;
- while(!$abortTable && $ok == 0){
-
- $mx=0;
- $newRow=1;
- while(!$abortTable && ($newPage || $newRow)){
-
- $y-=$height;
- if ($newPage || $y<$this->ez['bottomMargin'] || (isset($options['minRowSpace']) && $y<($this->ez['bottomMargin']+$options['minRowSpace'])) ){
- // check that enough rows are with the heading
- if ($options['protectRows']>0 && $movedOnce==0 && $cnt<=$options['protectRows']){
- // then we need to move the whole table onto the next page
- $movedOnce = 1;
- $abortTable = 1;
- }
-
- $y2=$y-$mx+2*$height+$decender-$newRow*$height;
- if ($options['showLines']){
- if (!$options['showHeadings']){
- $y0=$y1;
- }
- $this->ezPrvtTableDrawLines($pos,$options['gap'],$x0,$x1,$y0,$y1,$y2,$options['lineCol'],$options['innerLineThickness'],$options['outerLineThickness'],$options['showLines']);
- }
- if ($options['shaded']){
- $this->closeObject();
- $this->restoreState();
- }
- $this->ezNewPage();
- // and the margins may have changed, this is due to the possibility of the columns being turned on
- // as the columns are managed by manipulating the margins
-
- $dm = $this->ez['leftMargin']-$baseLeftMargin;
- foreach($basePos as $k=>$v){
- $pos[$k]=$v+$dm;
- }
-// $x0=$x0+$dm;
-// $x1=$x1+$dm;
- $x0=$baseX0+$dm;
- $x1=$baseX1+$dm;
-
- if ($options['shaded']){
- $this->saveState();
- $textObjectId = $this->openObject();
- $this->closeObject();
- $this->addObject($textObjectId);
- $this->reopenObject($textObjectId);
- }
- $this->setColor($options['textCol'][0],$options['textCol'][1],$options['textCol'][2],1);
- $y = $this->ez['pageHeight']-$this->ez['topMargin'];
- $y0=$y+$decender;
- $mx=0;
- if ($options['showHeadings']){
- $this->ezPrvtTableColumnHeadings($cols,$pos,$maxWidth,$height,$decender,$options['rowGap'],$options['fontSize'],$y,$options);
- $y1=$y;
- } else {
- $y1=$y0;
- }
- $firstLine=1;
- $y -= $height;
- }
- $newRow=0;
- // write the actual data
- // if these cells need to be split over a page, then $newPage will be set, and the remaining
- // text will be placed in $leftOvers
- $newPage=0;
- $leftOvers=array();
-
- foreach($cols as $colName=>$colTitle){
- $this->ezSetY($y+$height);
- $colNewPage=0;
- if (isset($row[$colName])){
- if (isset($options['cols'][$colName]) && isset($options['cols'][$colName]['link']) && strlen($options['cols'][$colName]['link'])){
-
- $lines = explode("\n",$row[$colName]);
- if (isset($row[$options['cols'][$colName]['link']]) && strlen($row[$options['cols'][$colName]['link']])){
- foreach($lines as $k=>$v){
- $lines[$k]=''.$v.'';
- }
- }
- } else {
- $lines = explode("\n",$row[$colName]);
- }
- } else {
- $lines = array();
- }
- $this->y -= $options['rowGap'];
- foreach ($lines as $line){
- $line = $this->ezProcessText($line);
- $start=1;
-
- while (strlen($line) || $start){
- $start=0;
- if (!$colNewPage){
- $this->y=$this->y-$height;
- }
- if ($this->y < $this->ez['bottomMargin']){
- // $this->ezNewPage();
- $newPage=1; // whether a new page is required for any of the columns
- $colNewPage=1; // whether a new page is required for this column
- }
- if ($colNewPage){
- if (isset($leftOvers[$colName])){
- $leftOvers[$colName].="\n".$line;
- } else {
- $leftOvers[$colName] = $line;
- }
- $line='';
- } else {
- if (isset($options['cols'][$colName]) && isset($options['cols'][$colName]['justification']) ){
- $just = $options['cols'][$colName]['justification'];
- } else {
- $just='left';
- }
-
- $line=$this->addTextWrap($pos[$colName],$this->y,$maxWidth[$colName],$options['fontSize'],$line,$just);
- }
- }
- }
-
- $dy=$y+$height-$this->y+$options['rowGap'];
- if ($dy-$height*$newPage>$mx){
- $mx=$dy-$height*$newPage;
- }
- }
- // set $row to $leftOvers so that they will be processed onto the new page
- $row = $leftOvers;
- // now add the shading underneath
- if ($options['shaded'] && $cnt%2==0){
- $this->closeObject();
- $this->setColor($options['shadeCol'][0],$options['shadeCol'][1],$options['shadeCol'][2],1);
- $this->filledRectangle($x0-$options['gap']/2,$y+$decender+$height-$mx,$x1-$x0,$mx);
- $this->reopenObject($textObjectId);
- }
-
- if ($options['shaded']==2 && $cnt%2==1){
- $this->closeObject();
- $this->setColor($options['shadeCol2'][0],$options['shadeCol2'][1],$options['shadeCol2'][2],1);
- $this->filledRectangle($x0-$options['gap']/2,$y+$decender+$height-$mx,$x1-$x0,$mx);
- $this->reopenObject($textObjectId);
- }
-
- if ($options['showLines']>1){
- // then draw a line on the top of each block
-// $this->closeObject();
- $this->saveState();
- $this->setStrokeColor($options['lineCol'][0],$options['lineCol'][1],$options['lineCol'][2],1);
-// $this->line($x0-$options['gap']/2,$y+$decender+$height-$mx,$x1-$x0,$mx);
- if ($firstLine){
- $this->setLineStyle($options['outerLineThickness']);
- $firstLine=0;
- } else {
- $this->setLineStyle($options['innerLineThickness']);
- }
- $this->line($x0-$options['gap']/2,$y+$decender+$height,$x1-$options['gap']/2,$y+$decender+$height);
- $this->restoreState();
-// $this->reopenObject($textObjectId);
- }
- } // end of while
- $y=$y-$mx+$height;
-
- // checking row split over pages
- if ($options['splitRows']==0){
- if ( ( ($this->ezPageCount != $pageStart) || (isset($this->ez['columns']) && $this->ez['columns']['on']==1 && $columnStart != $this->ez['columns']['colNum'] )) && $secondTurn==0){
- // then we need to go back and try that again !
- $newPage=1;
- $secondTurn=1;
- $this->transaction('rewind');
- $row = $row_orig;
- $y = $y_orig;
- $y0 = $y0_orig;
- $y1 = $y1_orig;
- $ok=0;
-
- $dm = $this->ez['leftMargin']-$baseLeftMargin;
- foreach($basePos as $k=>$v){
- $pos[$k]=$v+$dm;
- }
- $x0=$baseX0+$dm;
- $x1=$baseX1+$dm;
-
- } else {
- $this->transaction('commit');
- $ok=1;
- }
- } else {
- $ok=1; // don't go round the loop if splitting rows is allowed
- }
-
- } // end of while to check for row splitting
- if ($abortTable){
- if ($ok==0){
- $this->transaction('abort');
- }
- // only the outer transaction should be operational
- $this->transaction('rewind');
- $this->ezNewPage();
- break;
- }
-
- } // end of foreach ($data as $row)
-
- } // end of while ($abortTable)
-
- // table has been put on the page, the rows guarded as required, commit.
- $this->transaction('commit');
-
- $y2=$y+$decender;
- if ($options['showLines']){
- if (!$options['showHeadings']){
- $y0=$y1;
- }
- $this->ezPrvtTableDrawLines($pos,$options['gap'],$x0,$x1,$y0,$y1,$y2,$options['lineCol'],$options['innerLineThickness'],$options['outerLineThickness'],$options['showLines']);
- }
-
- // close the object for drawing the text on top
- if ($options['shaded']){
- $this->closeObject();
- $this->restoreState();
- }
-
- $this->y=$y;
- return $y;
-}
-
-// ------------------------------------------------------------------------------
-function ezProcessText($text){
- // this function will intially be used to implement underlining support, but could be used for a range of other
- // purposes
- $search = array('','','','');
- $replace = array('','','','');
- return str_replace($search,$replace,$text);
-}
-
-// ------------------------------------------------------------------------------
-
-function ezText($text,$size=0,$options=array(),$test=0){
- // this will add a string of text to the document, starting at the current drawing
- // position.
- // it will wrap to keep within the margins, including optional offsets from the left
- // and the right, if $size is not specified, then it will be the last one used, or
- // the default value (12 I think).
- // the text will go to the start of the next line when a return code "\n" is found.
- // possible options are:
- // 'left'=> number, gap to leave from the left margin
- // 'right'=> number, gap to leave from the right margin
- // 'aleft'=> number, absolute left position (overrides 'left')
- // 'aright'=> number, absolute right position (overrides 'right')
- // 'justification' => 'left','right','center','centre','full'
-
- // only set one of the next two items (leading overrides spacing)
- // 'leading' => number, defines the total height taken by the line, independent of the font height.
- // 'spacing' => a real number, though usually set to one of 1, 1.5, 2 (line spacing as used in word processing)
-
- // if $test is set then this should just check if the text is going to flow onto a new page or not, returning true or false
-
- // apply the filtering which will make the underlining function.
- $text = $this->ezProcessText($text);
-
- $newPage=false;
- $store_y = $this->y;
-
- if (is_array($options) && isset($options['aleft'])){
- $left=$options['aleft'];
- } else {
- $left = $this->ez['leftMargin'] + ((is_array($options) && isset($options['left']))?$options['left']:0);
- }
- if (is_array($options) && isset($options['aright'])){
- $right=$options['aright'];
- } else {
- $right = $this->ez['pageWidth'] - $this->ez['rightMargin'] - ((is_array($options) && isset($options['right']))?$options['right']:0);
- }
- if ($size<=0){
- $size = $this->ez['fontSize'];
- } else {
- $this->ez['fontSize']=$size;
- }
-
- if (is_array($options) && isset($options['justification'])){
- $just = $options['justification'];
- } else {
- $just = 'left';
- }
-
- // modifications to give leading and spacing based on those given by Craig Heydenburg 1/1/02
- if (is_array($options) && isset($options['leading'])) { ## use leading instead of spacing
- $height = $options['leading'];
- } else if (is_array($options) && isset($options['spacing'])) {
- $height = $this->getFontHeight($size) * $options['spacing'];
- } else {
- $height = $this->getFontHeight($size);
- }
-
-
- $lines = explode("\n",$text);
- foreach ($lines as $line){
- $start=1;
- while (strlen($line) || $start){
- $start=0;
- $this->y=$this->y-$height;
- if ($this->y < $this->ez['bottomMargin']){
- if ($test){
- $newPage=true;
- } else {
- $this->ezNewPage();
- // and then re-calc the left and right, in case they have changed due to columns
- }
- }
- if (is_array($options) && isset($options['aleft'])){
- $left=$options['aleft'];
- } else {
- $left = $this->ez['leftMargin'] + ((is_array($options) && isset($options['left']))?$options['left']:0);
- }
- if (is_array($options) && isset($options['aright'])){
- $right=$options['aright'];
- } else {
- $right = $this->ez['pageWidth'] - $this->ez['rightMargin'] - ((is_array($options) && isset($options['right']))?$options['right']:0);
- }
- $line=$this->addTextWrap($left,$this->y,$right-$left,$size,$line,$just,0,$test);
- }
- }
-
- if ($test){
- $this->y=$store_y;
- return $newPage;
- } else {
- return $this->y;
- }
-}
-
-// ------------------------------------------------------------------------------
-
-function ezImage($image,$pad = 5,$width = 0,$resize = 'full',$just = 'center',$border = ''){
- //beta ezimage function
- if (stristr($image,'://'))//copy to temp file
- {
- $fp = @fopen($image,"rb");
- while(!feof($fp))
- {
- $cont.= fread($fp,1024);
- }
- fclose($fp);
- $image = tempnam ("/tmp", "php-pdf");
- $fp2 = @fopen($image,"w");
- fwrite($fp2,$cont);
- fclose($fp2);
- $temp = true;
- }
-
- if (!(file_exists($image))) return false; //return immediately if image file does not exist
- $imageInfo = getimagesize($image);
- switch ($imageInfo[2]){
- case 2:
- $type = "jpeg";
- break;
- case 3:
- $type = "png";
- break;
- default:
- return false; //return if file is not jpg or png
- }
- if ($width == 0) $width = $imageInfo[0]; //set width
- $ratio = $imageInfo[0]/$imageInfo[1];
-
- //get maximum width of image
- if (isset($this->ez['columns']) && $this->ez['columns']['on'] == 1)
- {
- $bigwidth = $this->ez['columns']['width'] - ($pad * 2);
- }
- else
- {
- $bigwidth = $this->ez['pageWidth'] - ($pad * 2);
- }
- //fix width if larger than maximum or if $resize=full
- if ($resize == 'full' || $resize == 'width' || $width > $bigwidth)
- {
- $width = $bigwidth;
-
- }
-
- $height = ($width/$ratio); //set height
-
- //fix size if runs off page
- if ($height > ($this->y - $this->ez['bottomMargin'] - ($pad * 2)))
- {
- if ($resize != 'full')
- {
- $this->ezNewPage();
- }
- else
- {
- $height = ($this->y - $this->ez['bottomMargin'] - ($pad * 2)); //shrink height
- $width = ($height*$ratio); //fix width
- }
- }
-
- //fix x-offset if image smaller than bigwidth
- if ($width < $bigwidth)
- {
- //center if justification=center
- if ($just == 'center')
- {
- $offset = ($bigwidth - $width) / 2;
- }
- //move to right if justification=right
- if ($just == 'right')
- {
- $offset = ($bigwidth - $width);
- }
- //leave at left if justification=left
- if ($just == 'left')
- {
- $offset = 0;
- }
- }
-
-
- //call appropriate function
- if ($type == "jpeg"){
- $this->addJpegFromFile($image,$this->ez['leftMargin'] + $pad + $offset, $this->y + $this->getFontHeight($this->ez['fontSize']) - $pad - $height,$width);
- }
-
- if ($type == "png"){
- $this->addPngFromFile($image,$this->ez['leftMargin'] + $pad + $offset, $this->y + $this->getFontHeight($this->ez['fontSize']) - $pad - $height,$width);
- }
- //draw border
- if ($border != '')
- {
- if (!(isset($border['color'])))
- {
- $border['color']['red'] = .5;
- $border['color']['blue'] = .5;
- $border['color']['green'] = .5;
- }
- if (!(isset($border['width']))) $border['width'] = 1;
- if (!(isset($border['cap']))) $border['cap'] = 'round';
- if (!(isset($border['join']))) $border['join'] = 'round';
-
-
- $this->setStrokeColor($border['color']['red'],$border['color']['green'],$border['color']['blue']);
- $this->setLineStyle($border['width'],$border['cap'],$border['join']);
- $this->rectangle($this->ez['leftMargin'] + $pad + $offset, $this->y + $this->getFontHeight($this->ez['fontSize']) - $pad - $height,$width,$height);
-
- }
- // move y below image
- $this->y = $this->y - $pad - $height;
- //remove tempfile for remote images
- if ($temp == true) unlink($image);
-
-}
-// ------------------------------------------------------------------------------
-
-// note that templating code is still considered developmental - have not really figured
-// out a good way of doing this yet.
-function loadTemplate($templateFile){
- // this function will load the requested template ($file includes full or relative pathname)
- // the code for the template will be modified to make it name safe, and then stored in
- // an array for later use
- // The id of the template will be returned for the user to operate on it later
- if (!file_exists($templateFile)){
- return -1;
- }
-
- $code = implode('',file($templateFile));
- if (!strlen($code)){
- return;
- }
-
- $code = trim($code);
- if (substr($code,0,5)==''){
- $code = substr($code,0,strlen($code)-2);
- }
- if (isset($this->ez['numTemplates'])){
- $newNum = $this->ez['numTemplates'];
- $this->ez['numTemplates']++;
- } else {
- $newNum=0;
- $this->ez['numTemplates']=1;
- $this->ez['templates']=array();
- }
-
- $this->ez['templates'][$newNum]['code']=$code;
-
- return $newNum;
-}
-
-// ------------------------------------------------------------------------------
-
-function execTemplate($id,$data=array(),$options=array()){
- // execute the given template on the current document.
- if (!isset($this->ez['templates'][$id])){
- return;
- }
- eval($this->ez['templates'][$id]['code']);
-}
-
-// ------------------------------------------------------------------------------
-function ilink($info){
- $this->alink($info,1);
-}
-
-function alink($info,$internal=0){
- // a callback function to support the formation of clickable links within the document
- $lineFactor=0.05; // the thickness of the line as a proportion of the height. also the drop of the line.
- switch($info['status']){
- case 'start':
- case 'sol':
- // the beginning of the link
- // this should contain the URl for the link as the 'p' entry, and will also contain the value of 'nCallback'
- if (!isset($this->ez['links'])){
- $this->ez['links']=array();
- }
- $i = $info['nCallback'];
- $this->ez['links'][$i] = array('x'=>$info['x'],'y'=>$info['y'],'angle'=>$info['angle'],'decender'=>$info['decender'],'height'=>$info['height'],'url'=>$info['p']);
- $this->saveState();
- $this->setColor(0,0,1);
- $this->setStrokeColor(0,0,1);
- $thick = $info['height']*$lineFactor;
- $this->setLineStyle($thick);
- break;
- case 'end':
- case 'eol':
- // the end of the link
- // assume that it is the most recent opening which has closed
- $i = $info['nCallback'];
- $start = $this->ez['links'][$i];
- // add underlining
- $a = deg2rad((float)$start['angle']-90.0);
- $drop = $start['height']*$lineFactor*1.5;
- $dropx = cos($a)*$drop;
- $dropy = -sin($a)*$drop;
- $this->line($start['x']-$dropx,$start['y']-$dropy,$info['x']-$dropx,$info['y']-$dropy);
- if ($internal) {
- $this->addInternalLink($start['url'],$start['x'],$start['y']+$start['decender'],$info['x'],$start['y']+$start['decender']+$start['height']);
- } else {
- $this->addLink($start['url'],$start['x'],$start['y']+$start['decender'],$info['x'],$start['y']+$start['decender']+$start['height']);
- }
- $this->restoreState();
- break;
- }
-}
-
-// ------------------------------------------------------------------------------
-
-function uline($info){
- // a callback function to support underlining
- $lineFactor=0.05; // the thickness of the line as a proportion of the height. also the drop of the line.
- switch($info['status']){
- case 'start':
- case 'sol':
-
- // the beginning of the underline zone
- if (!isset($this->ez['links'])){
- $this->ez['links']=array();
- }
- $i = $info['nCallback'];
- $this->ez['links'][$i] = array('x'=>$info['x'],'y'=>$info['y'],'angle'=>$info['angle'],'decender'=>$info['decender'],'height'=>$info['height']);
- $this->saveState();
- $thick = $info['height']*$lineFactor;
- $this->setLineStyle($thick);
- break;
- case 'end':
- case 'eol':
- // the end of the link
- // assume that it is the most recent opening which has closed
- $i = $info['nCallback'];
- $start = $this->ez['links'][$i];
- // add underlining
- $a = deg2rad((float)$start['angle']-90.0);
- $drop = $start['height']*$lineFactor*1.5;
- $dropx = cos($a)*$drop;
- $dropy = -sin($a)*$drop;
- $this->line($start['x']-$dropx,$start['y']-$dropy,$info['x']-$dropx,$info['y']-$dropy);
- $this->restoreState();
- break;
- }
-}
-
-// ------------------------------------------------------------------------------
-
-}
-?>
\ No newline at end of file
--
cgit v1.2.3