diff options
Diffstat (limited to 'demos/quickstart/protected/pages/Advanced/es')
18 files changed, 0 insertions, 1647 deletions
diff --git a/demos/quickstart/protected/pages/Advanced/es/Assets.page b/demos/quickstart/protected/pages/Advanced/es/Assets.page deleted file mode 100755 index fc40b561..00000000 --- a/demos/quickstart/protected/pages/Advanced/es/Assets.page +++ /dev/null @@ -1,69 +0,0 @@ -<com:TContent ID="body" >
-
-<h1 id="5701">Assets</h1>
-<p id="740577" class="block-content">
-Assets are resource files (such as images, sounds, videos, CSS stylesheets, javascripts, etc.) that belong to specific component classes. Assets are meant to be provided to Web users. For better reusability and easier deployment of the corresponding component classes, assets should reside together with the component class files . For example, a toggle button may use two images, stored in file <tt>down.gif</tt> and <tt>up.gif</tt>, to show different toggle states. If we require the image files be stored under <tt>images</tt> directory under the Web server document root, it would be inconvenient for the users of the toggle button component, because each time they develop or deploy a new application, they would have to manually copy the image files to that specific directory. To eliminate this requirement, a directory relative to the component class file should be used for storing the image files. A common strategy is to use the directory containing the component class file to store the asset files.
-</p>
-<p id="740578" class="block-content">
-Because directories containing component class files are normally inaccessible by Web users, PRADO implements an asset publishing scheme to make available the assets to Web users. An asset, after being published, will have a URL by which Web users can retrieve the asset file.
-</p>
-
-<h2 id="5702">Asset Publishing</h2>
-<p id="740579" class="block-content">
-PRADO provides several methods for publishing assets or directories containing assets:
-</p>
-<ul id="u1" class="block-content">
-<li>In a template file, you can use <a href="?page=Configurations.Templates2#at">asset tags</a> to publish assets and obtain their URLs. Note, the assets must be relative to the directory containing the template file.</li>
-<li>In PHP code, you can call <tt>$object->publishAsset($assetPath)</tt> to publish an asset and obtain its URL. Here, <tt>$object</tt> refers to an instance of <tt>TApplicationComponent</tt> or derived class, and <tt>$assetPath</tt> is a file or directory relative to the directory containing the class file.</li>
-<li>If you want to publish an arbitrary asset, you need to call <tt>TAssetManager::publishFilePath($path)</tt>.</li>
-</ul>
-<p id="740580" class="block-content">
-BE AWARE: Be very careful with assets publishing, because it gives Web users access to files that were previously inaccessible to them. Make sure that you do not publish files that do not want Web users to see.
-</p>
-
-<h2 id="5703">Customization</h2>
-<p id="740581" class="block-content">
-Asset publishing is managed by the <tt>System.Web.TAssetManager</tt> module. By default, all published asset files are stored under the <tt>[AppEntryPath]/assets</tt> directory, where <tt>AppEntryPath</tt> refers to the directory containing the application entry script. Make sure the <tt>assets</tt> directory is writable by the Web server process. You may change this directory to another by configuring the <tt>BasePath</tt> and <tt>BaseUrl</tt> properties of the <tt>TAssetManager</tt> module in application configuration,
-</p>
-<com:TTextHighlighter Language="xml" CssClass="source block-content" id="code1">
-<modules>
- <module id="asset"
- class="System.Web.TAssetManager"
- BasePath="Web.images"
- BaseUrl="images" />
-</modules>
-</com:TTextHighlighter>
-
-<h2 id="5704">Performance</h2>
-<p id="740582" class="block-content">
-PRADO uses caching techniques to ensure the efficiency of asset publishing. Publishing an asset essentially requires file copy operation, which is expensive. To save unnecessary file copy operations, <tt>System.Web.TAssetManager</tt> only publishes an asset when it has a newer file modification time than the published file. When an application runs under the <tt>Performance</tt> mode, such timestamp checking is also omitted.
-</p>
-<p id="740583" class="block-content">
-ADVISORY: Do not overuse asset publishing. The asset concept is mainly used to help better reuse and redistribute component classes. Normally, you should not use asset publishing for resources that are not bound to any component in an application. For example, you should not use asset publishing for images that are mainly used as design elements (e.g. logos, background images, etc.) Let Web server to directly serve these images will help improve the performance of your application.
-</p>
-
-<h2 id="5705">A Toggle Button Example</h2>
-<p id="740584" class="block-content">
-We now use the toggle button example to explain the usage of assets. The control uses two image files <tt>up.gif</tt> and <tt>down.gif</tt>, which are stored under the directory containing the control class file. When the button is in <tt>Up</tt> state, we would like to show the <tt>up.gif</tt> image. This can be done as follows,
-</p>
-<com:TTextHighlighter CssClass="source block-content" id="code2">
-class ToggleButton extends TWebControl {
- ...
- protected function addAttributesToRender($writer) {
- ...
- if($this->getState()==='Up') {
- $url=$this->getAsset('up.gif');
- $writer->addAttribute('src',$url);
- }
- ...
- }
- ...
-}
-</com:TTextHighlighter>
-<p id="740585" class="block-content">
-In the above, the call <tt>$this->getAsset('up.gif')</tt> will publish the <tt>up.gif</tt> image file and return a URL for the published image file. The URL is then rendered as the <tt>src</tt> attribute of the HTML image tag.
-</p>
-<p id="740586" class="block-content">
-To redistribute <tt>ToggleButton</tt>, simply pack together the class file and the image files. Users of <tt>ToggleButton</tt> merely need to unpack the file, and they can use it right away, without worrying about where to copy the image files to.
-</p>
-</com:TContent>
diff --git a/demos/quickstart/protected/pages/Advanced/es/Auth.page b/demos/quickstart/protected/pages/Advanced/es/Auth.page deleted file mode 100755 index 82af40bb..00000000 --- a/demos/quickstart/protected/pages/Advanced/es/Auth.page +++ /dev/null @@ -1,171 +0,0 @@ -<com:TContent ID="body" >
-
-<h1 id="5501">Autenticación y Autorizacion</h1>
-<p id="720549" class="block-content">
-Autenticación es un proceso de verificacion de alguna persona cuando esta dice ser quien es. Usualmente se utiliza para esto un nombre de usuario y un contraseña, pero podría incluir otros métodos para demostrar su identidad, tales como tarjetas inteligentes, huellas digitales, etc.
-</p>
-<p id="720550" class="block-content">
-Autorización es el proceso de saber si la persona, una vez indetificada, esta permitida a manipular recursos especificos. Esto es comunmente determinado conociendo si la persona tiene un rol especifico que le da acceso a los recursos solicitados.
-</p>
-
-<h2 id="5502">Funcionamiento de la Autenticación y Autorizacion en PRADO</h2>
-<p id="720551" class="block-content">
-PRADO proporciona una capa extensible de autenticacion/autirizacion. Como esta descrito en el <a href="">Ciclo de vida de una aplicacion PRADO</a>, <tt>TApplication</tt> reserva diversos modulos del ciclo de vida, responsables de la autenticacion y la autorizacion. PRADO proporciona el modulo <tt>TAuthManager</tt> para este propósito. Los desarrolladores pueden incorporar sus propios modulos de autenticacion/autorizacion (auth) facilmente.
-<tt>TAuthManager</tt> esta diseñado para ser usado en conjunto con el modulo <tt>TUserManager</tt>, el cual implementa una base de datos de usuarios de solo lectura (read-only).
-</p>
-<p id="720552" class="block-content">
-When a page request occurs, <tt>TAuthManager</tt> will try to restore user information from session. If no user information is found, the user is considered as an anonymous or guest user. To facilitate user identity verification, <tt>TAuthManager</tt> provides two commonly used methods: <tt>login()</tt> and <tt>logout()</tt>. A user is logged in (verified) if his username and password entries match a record in the user database managed by <tt>TUserManager</tt>. A user is logged out if his user information is cleared from session and he needs to re-login if he makes new page requests.
-</p>
-<p id="720553" class="block-content">
-During <tt>Authorization</tt> application lifecycle, which occurs after <tt>Autenticación</tt> lifecycle, <tt>TAuthManager</tt> will verify if the current user has access to the requested page according to a set of authorization rules. The authorization is role-based, i.e., a user has access to a page if 1) the page explicitly states that the user has access; 2) or the user is of a particular role that has access to the page. If the user does not have access to the page, <tt>TAuthManager</tt> will redirect user browser to the login page which is specified by <tt>LoginPage</tt> property.
-</p>
-
-<h2 id="5503">Using PRADO Auth Framework</h2>
-<p id="720554" class="block-content">
-To enable PRADO auth framework, add the <tt>TAuthManager</tt> module and <tt>TUserManager</tt> module to <a href="">application configuration</a>,
-</p>
-<com:TTextHighlighter Language="xml" CssClass="source block-content" id="code1">
-<service id="page" class="TPageService">
- <modules>
- <module id="auth" class="System.Security.TAuthManager"
- UserManager="users" LoginPage="UserLogin" />
- <module id="users" class="System.Security.TUserManager"
- PasswordMode="Clear">
- <user name="demo" password="demo" />
- <user name="admin" password="admin" />
- </module>
- </modules>
-</service>
-</com:TTextHighlighter>
-<p id="720555" class="block-content">
-In the above, the <tt>UserManager</tt> property of <tt>TAuthManager</tt> is set to the <tt>users</tt> module which is <tt>TUserManager</tt>. Developers may replace it with a different user management module that is derived from <tt>TUserManager</tt>.
-</p>
-<p id="720556" class="block-content">
-Authorization rules for pages are specified in <a href="">page configurations</a> as follows,
-</p>
-<com:TTextHighlighter Language="xml" CssClass="source block-content" id="code2">
-<authorization>
- <allow pages="PageID1,PageID2"
- users="User1,User2"
- roles="Role1" />
- <deny pages="PageID1,PageID2"
- users="?"
- verb="post" />
-</authorization>
-</com:TTextHighlighter>
-<p id="720557" class="block-content">
-An authorization rule can be either an <tt>allow</tt> rule or a <tt>deny</tt> rule. Each rule consists of four optional properties:
-</p>
-<ul id="u1" class="block-content">
-<li><tt>pages</tt> - list of comma-separated page names that this rule applies to. If empty, not set or wildcard '*', this rule will apply to all pages under the current directory and all its subdirectories recursively.</li>
-<li><tt>users</tt> - list of comma-separated user names that this rule applies to. If empty, not set or wildcard '*', this rule will apply to all users including anonymous/guest user. A character ? refers to anonymous/guest user. And a character @ refers to authenticated users (available since v3.1).</li>
-<li><tt>roles</tt> - list of comma-separated user roles that this rule applies to. If empty, not set or wildcard '*', this rule will apply to all user roles.</li>
-<li><tt>verb</tt> - page access method that this rule applies to. It can be either <tt>get</tt> or <tt>post</tt>. If empty, not set or wildcard '*', the rule will apply to both methods.</li>
-</ul>
-
-<p id="720558" class="block-content">
-When a page request is being processed, a list of authorization rules may be available. However, only the <i>first effective</i> rule <i>matching</i> the current user will render the authorization result.
-</p>
-<ul id="u2" class="block-content">
-<li>Rules are ordered bottom-up, i.e., the rules contained in the configuration of current page folder go first. Rules in configurations of parent page folders go after.</li>
-<li>A rule is effective if the current page is in the listed pages of the rule AND the current user action (<tt>get</tt> or <tt>post</tt>) is in the listed actions.</li>
-<li>A rule matching occurs if the current user name is in the listed user names of an <i>effective</i> rule OR if the user's role is in the listed roles of that rule.</li>
-<li>If no rule matches, the user is authorized.</li>
-</ul>
-<p id="720559" class="block-content">
-In the above example, anonymous users will be denied from posting to <tt>PageID1</tt> and <tt>PageID2</tt>, while <tt>User1</tt> and <tt>User2</tt> and all users of role <tt>Role1</tt> can access the two pages (in both <tt>get</tt> and <tt>post</tt> methods).
-</p>
-<com:SinceVersion Version="3.1.1" />
-<p class="block-content">
-Since version 3.1.1, the <tt>pages</tt> attribute in the authorization rules can take relative page paths with wildcard '*'. For example, <tt>pages="admin.Home"</tt> refers to the <tt>Home</tt> page under the <tt>admin</tt> directory, and <tt>pages="admin.*"</tt> would refer to all pages under the <tt>admin</tt> directory and subdirectories.
-</p>
-
-<p class="block-content">
-Also introduced in version 3.1.1 are IP rules. They are specified by a new attribute <tt>ips</tt> in authorization rules. The IP rules are used to determine if an authorization rule aplies to an end-user according to his IP address. One can list a few IPs together, separated by comma ','. Wildcard '*' can be used in the rules. For example, <tt>ips="192.168.0.2, 192.168.1.*"</tt> means the rule applies to users whose IP address is 192.168.0.2 or 192.168.1.*. The latter matches any host in the subnet 192.168.1. If the attribute 'ips' is empty, not set or wildcard '*', the corresponding rule will apply to requests coming from any host address.
-</p>
-
-<h2 id="5504">Using <tt>TUserManager</tt></h2>
-<p id="720560" class="block-content">
-As aforementioned, <tt>TUserManager</tt> implements a read-only user database. The user information are specified in either application configuration or an external XML file.
-</p>
-<p id="720561" class="block-content">
-We have seen in the above example that two users are specified in the application configuration. Complete syntax of specifying the user and role information is as follows,
-</p>
-<com:TTextHighlighter Language="xml" CssClass="source block-content" id="code3">
-<user name="demo" password="demo" roles="demo,admin" />
-<role name="admin" users="demo,demo2" />
-</com:TTextHighlighter>
-<p id="720562" class="block-content">
-where the <tt>roles</tt> attribute in <tt>user</tt> element is optional. User roles can be specified in either the <tt>user</tt> element or in a separate <tt>role</tt> element.
-</p>
-
-<h2 id="5505">Using <tt>TDbUserManager</tt></h2>
-<p id="720563" class="block-content">
-<tt>TDbUserManager</tt> is introduced in v3.1.0. Its main purpose is to simplify the task of managing user accounts that are stored in a database. It requires developers to write a user class that represents the necessary information for a user account. The user class must extend from <tt>TDbUser</tt>.
-</p>
-<p id="720564" class="block-content">
-To use <tt>TDbUserManager</tt>, configure it in the application configuration like following:
-</p>
-<com:TTextHighlighter Language="xml" CssClass="source block-content" id="code4">
-<module id="db"
- class="System.Data.TDataSourceConfig" ..../>
-<module id="users"
- class="System.Security.TDbUserManager"
- UserClass="Path.To.MyUserClass"
- ConnectionID="db" />
-<module id="auth"
- class="System.Security.TAuthManager"
- UserManager="users" LoginPage="Path.To.LoginPage" />
-</com:TTextHighlighter>
-
-</p>
-<p id="720565" class="block-content">
-In the above, <tt>UserClass</tt> specifies what class will be used to create user instance. The class must extend from <tt>TDbUser</tt>. <tt>ConnectionID</tt> refers to the ID of a <tt>TDataSourceConfig</tt> module which specifies how to establish database connection to retrieve user information.
-</p>
-<p id="720566" class="block-content">
-The user class has to implement the two abstract methods in <tt>TDbUser</tt>: <tt>validateUser()</tt> and <tt>createUser()</tt>. Since user account information is stored in a database, the user class may make use of its <tt>DbConnection</tt> property to reach the database.
-</p>
-<com:SinceVersion Version="3.1.1" />
-<p id="720567" class="block-content">
-Since 3.1.1, <tt>TAuthManager</tt> provides support to allow remembering login by setting <tt>AllowAutoLogin</tt> to true. Accordingly, <tt>TDbUser</tt> adds two methods to facilitate the implementation of this feature. In particular, two new methods are introduced: <tt>createUserFromCookie()</tt> and <tt>saveUserToCookie()</tt>. Developers should implement these two methods if remembering login is needed. Below is a sample implementation:
-</p>
-<com:TTextHighlighter Language="php" CssClass="source block-content" id="code5">
-public function createUserFromCookie($cookie)
-{
- if(($data=$cookie->Value)!=='')
- {
- $application=Prado::getApplication();
- if(($data=$application->SecurityManager->validateData($data))!==false)
- {
- $data=unserialize($data);
- if(is_array($data) && count($data)===3)
- {
- list($username,$address,$token)=$data;
- $sql='SELECT passcode FROM user WHERE LOWER(username)=:username';
- $command=$this->DbConnection->createCommand($sql);
- $command->bindValue(':username',strtolower($username));
- if($token===$command->queryScalar() && $token!==false && $address=$application->Request->UserHostAddress)
- return $this->createUser($username);
- }
- }
- }
- return null;
-}
-
-public function saveUserToCookie($cookie)
-{
- $application=Prado::getApplication();
- $username=strtolower($this->Name);
- $address=$application->Request->UserHostAddress;
- $sql='SELECT passcode FROM user WHERE LOWER(username)=:username';
- $command=$this->DbConnection->createCommand($sql);
- $command->bindValue(':username',strtolower($username));
- $token=$command->queryScalar();
- $data=array($username,$address,$token);
- $data=serialize($data);
- $data=$application->SecurityManager->hashData($data);
- $cookie->setValue($data);
-}
-</com:TTextHighlighter>
-
-</com:TContent>
diff --git a/demos/quickstart/protected/pages/Advanced/es/Collections.page b/demos/quickstart/protected/pages/Advanced/es/Collections.page deleted file mode 100755 index 55f0d554..00000000 --- a/demos/quickstart/protected/pages/Advanced/es/Collections.page +++ /dev/null @@ -1,135 +0,0 @@ -<com:TContent ID="body" >
-
-<h1 id="5501">Collections</h1>
-<p id="710529" class="block-content">
-Collection is a basic data structure in programming. In traditional PHP programming, array is used widely to represent collection data structure. A PHP array is a mix of cardinal-indexed array and hash table.
-</p>
-<p id="710530" class="block-content">
-To enable object-oriented manipulation of collections, PRADO provides a set of powerful collection classes. Among them, the <tt>TList</tt> and <tt>TMap</tt> are the most fundamental and usually serve as the base classes for other collection classes. Since many PRADO components have properties that are of collection type, it is very important for developers to master the usage of PRADO collection classes.
-</p>
-
-<h2 id="5502">Using <tt>TList</tt></h2>
-<p id="710531" class="block-content">
-A <tt>TList</tt> object represents a cardinal-indexed array, i.e., an array (object) with the index 0, 1, 2, ...
-</p>
-<p id="710532" class="block-content">
-<tt>TList</tt> may be used like a PHP array. For example,
-</p>
-<com:TTextHighlighter CssClass="source block-content" id="code1">
-$list=new TList; // create a list object
-...
-$item=$list[$index]; // read the item at the specified index
-$list[]=$item; // append the item at the end
-$list[$index]=$item; // replace the item at the specified index
-unset($list[$index]); // remove the item at $index
-if(isset($list[$index])) // test if the list has an item at $index
-foreach($list as $index=>$item) // traverse each item in the list
-</com:TTextHighlighter>
-
-<p id="710533" class="block-content">
-To obtain the number of items in the list, use the <tt>Count</tt> property. Note, do not use <tt>count($list)</tt>, as it always returns 1.
-</p>
-
-<p id="710534" class="block-content">
-In addition, <tt>TList</tt> implements a few commonly used convenient methods for manipulating the data in a list. These include
-</p>
-<ul id="u1" class="block-content">
- <li><tt>clear()</tt>: removes all items in the list.</li>
- <li><tt>contains()</tt>: tests if the list contains the specified item.</li>
- <li><tt>indexOf()</tt>: obtains the zero-based index of the specified item in the list.</li>
- <li><tt>toArray()</tt>: returns an array representation of the items in the list.</li>
- <li><tt>copyFrom()</tt>: populates the list with data from an array or traversable object (including <tt>TList</tt>). Existing items will be removed first.</li>
- <li><tt>mergeWith()</tt>: appends the list with data from an array or traversable object (including <tt>TList</tt>).</li>
-</ul>
-
-<h3 id="5504">Using <tt>TList</tt>-based component properties</h3>
-<p id="710535" class="block-content">
-As aforementioned, many PRADO component properties are based on <tt>TList</tt> or <tt>TList</tt>-derived collection classes. These properties all share the above usages.
-</p>
-<p id="710536" class="block-content">
-For example, <tt>TControl</tt> (the base class for all PRADO controls) has a property called <tt>Controls</tt> which represents the collection of child controls. The type of <tt>Controls</tt> is <tt>TControlCollection</tt> which extends <tt>TList</tt>. Therefore, to append a new child control, we can use the following,
-</p>
-<com:TTextHighlighter CssClass="source block-content" id="code2">
-$control->Controls[]=$newControl;
-</com:TTextHighlighter>
-<p id="710537" class="block-content">
-To traverse through the child controls, we can use,
-</p>
-<com:TTextHighlighter CssClass="source block-content" id="code3">
-foreach($control->Controls as $childControl) ...
-</com:TTextHighlighter>
-<p id="710538" class="block-content">
-Another example is the <tt>Items</tt> property, available in list controls, <tt>TRepeater</tt>, <tt>TDataList</tt> and <tt>TDataGrid</tt>. In these controls, the ancestor class of <tt>Items</tt> is <tt>TList</tt>.
-</p>
-
-<h3 id="5505">Extending <tt>TList</tt></h3>
-<p id="710539" class="block-content">
-Often, we want to extend <tt>TList</tt> to perform additional operations for each addition or removal of an item. The only methods that the child class needs to override are <tt>insertAt()</tt> and <tt>removeAt()</tt>. For example, to ensure the list only contains items that are of <tt>TControl</tt> type, we can override <tt>insertAt()</tt> as follows,
-</p>
-<com:TTextHighlighter CssClass="source block-content" id="code4">
-public function insertAt($index,$item)
-{
- if($item instanceof TControl)
- parent::insertAt($index,$item)
- else
- throw new Exception('TControl required.');
-}
-</com:TTextHighlighter>
-
-
-<h2 id="5503">Using <tt>TMap</tt></h2>
-<p id="710540" class="block-content">
-A <tt>TMap</tt> object represents a hash table (or we say string-indexed array).
-</p>
-<p id="710541" class="block-content">
-Similar to <tt>TList</tt>, <tt>TMap</tt> may be used like an array,
-</p>
-<com:TTextHighlighter CssClass="source block-content" id="code5">
-$map=new TMap; // create a map object
-...
-$map[$key]=$value; // add a key-value pair
-unset($map[$key]); // remove the value with the specified key
-if(isset($map[$key])) // if the map contains the key
-foreach($map as $key=>$value) // traverse the items in the map
-</com:TTextHighlighter>
-<p id="710542" class="block-content">
-The <tt>Count</tt> property gives the number of items in the map while the <tt>Keys</tt> property returns a list of keys used in the map.
-</p>
-
-<p id="710543" class="block-content">
-The following methods are provided by <tt>TMap</tt> for convenience,
-</p>
-<ul id="u2" class="block-content">
- <li><tt>clear()</tt>: removes all items in the map.</li>
- <li><tt>contains()</tt>: tests if the map contains the specified key.</li>
- <li><tt>toArray()</tt>: returns an array representation of the items in the map.</li>
- <li><tt>copyFrom()</tt>: populates the map with data from an array or traversable object (including <tt>TMap</tt>). Existing items will be removed first.</li>
- <li><tt>mergeWith()</tt>: appends the map with data from an array or traversable object (including <tt>TMap</tt>).</li>
-</ul>
-
-<h3 id="5506">Using of <tt>TAttributeCollection</tt></h3>
-<p id="710544" class="block-content">
-<tt>TAttributeCollection</tt> is a special class extending from <tt>TMap</tt>. It is mainly used by the <tt>Attributes</tt> property of <tt>TControl</tt>.
-</p>
-Besides the normal functionalities provided by <tt>TMap</tt>, <tt>TAttributeCollection</tt> allows you to get and set collection items like getting and setting properties. For example,
-</p>
-<com:TTextHighlighter CssClass="source block-content" id="code6">
-$collection->Label='value'; // equivalent to: $collection['Label']='value';
-echo $collection->Label; // equivalent to: echo $collection['Label'];
-</com:TTextHighlighter>
-<p id="710545" class="block-content">
-Note, in the above <tt>$collection</tt> does NOT have a <tt>Label</tt> property.
-</p>
-<p id="710546" class="block-content">
-Unlike <tt>TMap</tt>, keys in <tt>TAttributeCollection</tt> are case-insensitive. Therefore, <tt>$collection->Label</tt> is equivalent to <tt>$collection->LABEL</tt>.
-</p>
-<p id="710547" class="block-content">
-Because of the above new features, when dealing with the <tt>Attributes</tt> property of controls, we may take advantage of the subproperty concept and configure control attribute values in a template as follows,
-</p>
-<com:TTextHighlighter Language="prado" CssClass="source block-content" id="code7">
-<com:TButton Attributes.onclick="if(!confirm('Are you sure?')) return false;" .../>
-</com:TTextHighlighter>
-<p id="710548" class="block-content">
-which adds an attribute named <tt>onclick</tt> to the <tt>TButton</tt> control.
-</p>
-</com:TContent>
diff --git a/demos/quickstart/protected/pages/Advanced/es/Error.page b/demos/quickstart/protected/pages/Advanced/es/Error.page deleted file mode 100755 index 24c7ead0..00000000 --- a/demos/quickstart/protected/pages/Advanced/es/Error.page +++ /dev/null @@ -1,77 +0,0 @@ -<com:TContent ID="body" >
-
-<h1 id="6301">Error Handling and Reporting</h1>
-<p id="800666" class="block-content">
-PRADO provides a complete error handling and reporting framework based on the PHP 5 exception mechanism.
-</p>
-
-<h2 id="6302">Exception Classes</h2>
-<p id="800667" class="block-content">
-Errors occur in a PRADO application may be classified into three categories: those caused by PHP script parsing, those caused by wrong code (such as calling an undefined function, setting an unknown property), and those caused by improper use of the Web application by client users (such as attempting to access restricted pages). PRADO is unable to deal with the first category of errors because they cannot be caught in PHP code. PRADO provides an exception hierarchy to deal with the second and third categories.
-</p>
-<p id="800668" class="block-content">
-All errors in PRADO applications are represented as exceptions. The base class for all PRADO exceptions is <tt>TException</tt>. It provides the message internationalization functionality to all system exceptions. An error message may be translated into different languages according to the user browser's language preference.
-</p>
-<p id="800669" class="block-content">
-Exceptions raised due to improper usage of the PRADO framework inherit from <tt>TSystemException</tt>, which can be one of the following exception classes:
-</p>
-<ul id="u1" class="block-content">
-<li><tt>TConfigurationException</tt> - improper configuration, such as error in application configuration, control templates, etc.</li>
-<li><tt>TInvalidDataValueException</tt> - data value is incorrect or unexpected.</li>
-<li><tt>TInvalidDataTypeException</tt> - data type is incorrect or unexpected.</li>
-<li><tt>TInvalidDataFormatException</tt> - format of data is incorrect.</li>
-<li><tt>TInvalidOperationException</tt> - invalid operation request.</li>
-<li><tt>TPhpErrorException</tt> - catchable PHP errors, warnings, notices, etc.</li>
-<li><tt>TSecurityException</tt> - errors related with security.</li>
-<li><tt>TIOException</tt> - IO operation error, such as file open failure.</li>
-<li><tt>TDBException</tt> - errors related with database operations.</li>
-<li><tt>TNotSupportedException</tt> - errors caused by requesting for unsupported feature.</li>
-<li><tt>THttpException</tt> - errors to be displayed to Web client users.</li>
-</ul>
-<p id="800670" class="block-content">
-Errors due to improper usage of the Web application by client users inherit from <tt>TApplicationException</tt>.
-</p>
-
-<h2 id="6303">Raising Exceptions</h2>
-<p id="800671" class="block-content">
-Raising exceptions in PRADO has no difference than raising a normal PHP exception. The only thing matters is to raise the right exception. In general, exceptions meant to be shown to application users should use <tt>THttpException</tt>, while exceptions shown to developers should use other exception classes.
-</p>
-
-<h2 id="6304">Error Capturing and Reporting</h2>
-<p id="800672" class="block-content">
-Exceptions raised during the runtime of PRADO applications are captured by <tt>System.Exceptions.TErrorHandler</tt> module. Different output templates are used to display the captured exceptions. <tt>THttpException</tt> is assumed to contain error messages that are meant for application end users and thus uses a specific group of templates. For all other exceptions, a common template shown as follows is used for presenting the exceptions.
-</p>
-<a href="<%~ exception2.gif %>" target="_blank"><img src="<%~ exception.gif %>" alt="exception page" style="border:0px"/></a>
-
-<h2 id="6305">Customizing Error Display</h2>
-<p id="800673" class="block-content">
-Developers can customize the presentation of exception messages. By default, all error output templates are stored under <tt>framework/Exceptions/templates</tt>. The location can be changed by configuring <tt>TErrorHandler</tt> in application configuration,
-</p>
-<com:TTextHighlighter Language="xml" CssClass="source block-content" id="code_800226">
-<module id="error"
- class="TErrorHandler"
- ErrorTemplatePath="Application.ErrorTemplates" />
-</com:TTextHighlighter>
-<p id="800674" class="block-content">
-<tt>THttpException</tt> uses a set of templates that are differentiated according to different <tt>StatusCode</tt> property value of <tt>THttpException</tt>. <tt>StatusCode</tt> has the same meaning as the status code in HTTP protocol. For example, a status code equal to 404 means the requested URL is not found on the server. The <tt>StatusCode</tt> value is used to select which output template to use. The output template files use the following naming convention:
-</p>
-<com:TTextHighlighter CssClass="source block-content" id="code_800227">
- error<status code>-<language code>.html
-</com:TTextHighlighter>
-<p id="800675" class="block-content">
-where <tt>status code</tt> refers to the <tt>StatusCode</tt> property value of <tt>THttpException</tt>, and <tt>language code</tt> must be a valid language such as <tt>en</tt>, <tt>zh</tt>, <tt>fr</tt>, etc. When a <tt>THttpException</tt> is raised, PRADO will select an appropriate template for displaying the exception message. PRADO will first locate a template file whose name contains the status code and whose language is preferred by the client browser window. If such a template is not present, it will look for a template that has the same status code but without language code.
-</p>
-<p id="800676" class="block-content">
-The naming convention for the template files used for all other exceptions is as follows,
-</p>
-<com:TTextHighlighter CssClass="source block-content" id="code_800228">
- exception-<language code>.html
-</com:TTextHighlighter>
-<p id="800677" class="block-content">
-Again, if the preferred language is not found, PRADO will try to use <tt>exception.html</tt>, instead.
-</p>
-<div class="note">
-<b class="tip">CAUTION:</b> When saving a template file, please make sure the file is saved using UTF-8 encoding. On Windows, you may use <tt>Notepad.exe</tt> to accomplish such saving.
-</div>
-
-</com:TContent>
diff --git a/demos/quickstart/protected/pages/Advanced/es/I18N.page b/demos/quickstart/protected/pages/Advanced/es/I18N.page deleted file mode 100755 index 1a559036..00000000 --- a/demos/quickstart/protected/pages/Advanced/es/I18N.page +++ /dev/null @@ -1,360 +0,0 @@ -<com:TContent ID="body" >
-
-<h1 id="6201">Internationalization (I18N) and Localization (L10N)</h1>
-<p id="790625" class="block-content">Many web application built with PHP will not have internationalization in mind when it was first written. It may be that it was not intended for use in languages and cultures. Internationalization is an important aspect due to the increase adoption of the Internet in many non-English speaking countries. The process of internationalization and localization will contain difficulties. Below are some general guidelines to internationalize an existing application.</p>
-
-<h2 id="6203">Separate culture/locale sensitive data</h2>
-
-<p id="790626" class="block-content">Identify and separate data that varies with culture. The most obvious are text/string/message. Other type of data should also be considered. The following list categorize some examples of culture sensitive data
-</p>
-
-<ul id="u1" class="block-content">
- <li> Strings, Messages, Text, in relatively small units (e.g. phrases, sentences, paragraphs, but not the full text of a book).</li>
- <li> Labels on buttons.</li>
- <li> Help files, large units of text, static text.</li>
- <li> Sounds.</li>
- <li> Colors.</li>
- <li> Graphics,Icons.</li>
- <li> Dates, Times.</li>
- <li> Numbers, Currency, Measurements.</li>
- <li> Phone numbers.</li>
- <li> Honorific and personal titles.</li>
- <li> Postal address.</li>
- <li> Page layout.</li>
-</ul>
-
-<p id="790627" class="block-content">If possible all manner of text should be isolated and store in a persistence format. These text include, application error messages, hard coded strings in PHP files, emails, static HTML text, and text on form elements (e.g. buttons).</p>
-
-<h2 id="6204">Configuration</h2>
-<p id="790628" class="block-content">To enable the localization features in PRADO, you need to add a few configuration options in your <a href="?page=Configurations.AppConfig">application configuration</a>.
-First you need to include the <tt>System.I18N.*</tt> namespace to your paths.
-</p>
-<com:TTextHighlighter Language="xml" CssClass="source block-content" id="code_790203">
-<paths>
- <using namespace="System.I18N.*" />
-</paths>
-</com:TTextHighlighter>
-
-<p id="790629" class="block-content">Then, if you wish to translate some text in your application, you need to add one translation message data source.</p>
-<com:TTextHighlighter Language="xml" CssClass="source block-content" id="code_790204">
-<module id="globalization" class="TGlobalization">
- <translation type="XLIFF"
- source="MyApp.messages"
- marker="@@"
- autosave="true" cache="true" />
-</module>
-</com:TTextHighlighter>
-
-<p id="790630" class="block-content">Where <tt>source</tt> in <tt>translation</tt> is the dot path to a directory
-where you are going to store your translate message catalogue. The <tt>autosave</tt>
-attribute if enabled, saves untranslated messages back into the message catalogue.
-With <tt>cache</tt> enabled, translated messages are saved in the application <tt>runtime/i18n</tt> directory.
-The <tt>marker</tt> value is used to surround any untranslated text.
-</p>
-
-<p id="790631" class="block-content">With the configuration complete, we can now start to localize your application. If you have <tt>autosave</tt> enabled, after running your application with some localization activity (i.e. translating some text), you will see a directory and a <tt>messages.xml</tt> created within your <tt>source</tt> directory.</p>
-
-<h2 id="6205">What to do with <tt>messages.xml</tt>?</h2>
-<p id="790632" class="block-content">The translation message catalogue file, if using <tt>type="XLIFF"</tt>, is a standardized translation message interchange XML format. You can edit the XML file using any UTF-8 aware editor. The format of the XML is something like the following.</p>
-
-<com:TTextHighlighter Language="xml" CssClass="source block-content" id="code_790205">
-<?xml version="1.0"?>
-<xliff version="1.0">
- <file original="I18N Example IndexPage"
- source-language="EN"
- datatype="plaintext"
- date="2005-01-24T11:07:53Z">
- <body>
-
-<trans-unit id="1">
-<source>Hello world.</source>
-<target>Hi World!!!</target>
-</trans-unit>
-
- </body>
- </file>
-</xliff>
-</com:TTextHighlighter>
-
-Each translation message is wrapped within a <tt>trans-unit</tt> tag, where <tt>source</tt> is the original message, and <tt>target</tt> is the translated message. Editors such as <a href="http://www.heartsome.net/EN/xlfedit.html">Heartsome XLIFF Translation Editor</a> can help in editing these XML files.
-
-
-<h2 id="6206">Setting and Changing Culture</h2>
-<p id="790633" class="block-content">Once globalization is enabled, you can access the globalization settings, such as, <tt>Culture</tt>, <tt>Charset</tt>, etc, using </p>
-<com:TTextHighlighter CssClass="source block-content" id="code_790206">
-$globalization = $this->getApplication()->getGlobalization();
-echo $globalization->Culture;
-$globalization->Charset= "GB-2312"; //change the charset
-</com:TTextHighlighter>
-
-<p id="790634" class="block-content">You also change the way the culture is determined by changing the <tt>class</tt> attribute in the module configuration. For example, to set the culture that depends on the browser settings, you can use the <tt>TGlobalizationAutoDetect</tt> class.
-<com:TTextHighlighter Language="xml" CssClass="source block-content" id="code_790207">
-<module id="globalization" class="TGlobalizationAutoDetect">
- ...
-</module>
-</com:TTextHighlighter>
-
-<p id="790635" class="block-content">You may also provide your own globalization class to change how the application culture is set.
-Lastly, you can change the globalization settings on page by page basis using <a href="?page=Configurations.Templates1#tct">template control tags</a>. For example, changing the <tt>Culture</tt> to "zh".</p>
-<com:TTextHighlighter Language="prado" CssClass="source block-content" id="code_790208">
-<%@ Application.Globalization.Culture="zh" %>
-</com:TTextHighlighter>
-
-<h2 id="6207">Localizing your PRADO application</h2>
-There are two areas in your application that may need message or string localization, in PHP code and in the templates. To localize strings within PHP, use the <tt>localize</tt> function detailed below. To localize text in the template, use the <a href="#ttranslate">TTranslate</a> component.
-<h2 id="6208">Using <tt>localize</tt> function to translate text within PHP</h2>
-
-<p id="790636" class="block-content">The <tt>localize</tt> function searches for a translated string that matches original from your translation source. First, you need to locate all the hard coded text in PHP that are displayed or sent to the end user. The following example localizes the text of the <tt>$sender</tt> (assuming, say, the sender is a button). The original code before localization is as follows.
-<com:TTextHighlighter CssClass="source block-content" id="code_790209">
-function clickMe($sender,$param)
-{
- $sender->Text="Hello, world!";
-}
-</com:TTextHighlighter>
-
-<p id="790637" class="block-content">The hard coded message "Hello, world!" is to be localized using the <tt>localize</tt> function. </p>
-<com:TTextHighlighter CssClass="source block-content" id="code_790210">
-function clickMe($sender,$param)
-{
- $sender->Text=Prado::localize("Hello, world!");
-}
-</com:TTextHighlighter>
-
-<h2 id="6209">Compound Messages</h2>
-
-<p id="790638" class="block-content">Compound messages can contain variable data. For example, in the message "There are 12 users online.", the integer 12 may change depending on some data in your application. This is difficult to translate because the position of the variable data may be difference for different languages. In addition, different languages have their own rules for plurals (if any) and/or quantifiers. The following example can not be easily translated, because the sentence structure is fixed by hard coding the variable data within message.</p>
-<com:TTextHighlighter CssClass="source block-content" id="code_790211">
-$num_users = 12;
-$message = "There are " . $num_users . " users online.";
-</com:TTextHighlighter>
-
-This problem can be solved using the <tt>localize</tt> function with string substitution. For example, the <tt>$message</tt> string above can be constructed as follows.
-<com:TTextHighlighter CssClass="source block-content" id="code_790212">
-$num_users = 12;
-$message = Prado::localize("There are {num_users} users online.", array('num_users'=>$num_users));
-</com:TTextHighlighter>
-<p id="790639" class="block-content">Where the second parameter in <tt>localize</tt> takes an associative array with the key as the substitution to find in the text and replaced it with the associated value.
-The <tt>localize</tt> function does not solve the problem of localizing languages that have plural forms, the solution is to use <a href="#choice-format">TChoiceFormat</a>.</p>
-
-<p id="790640" class="block-content">The following sample demonstrates the basics of localization in PRADO.</p>
-<com:RunBar PagePath="Advanced.Samples.I18N.Home" />
-
-<h1 id="6202">I18N Components</h1>
-<a name="ttranslate"></a>
-<h2 id="6210">TTranslate</h2>
-<p id="790641" class="block-content">Messages and strings can be localized in PHP or in templates.
-To translate a message or string in the template, use <tt>TTranslate</tt>.</p>
-
-<com:TTextHighlighter Language="prado" CssClass="source block-content" id="code_790213">
-<com:TTranslate>Hello World</com:TTranslate>
-<com:TTranslate Text="Goodbye" />
-</com:TTextHighlighter>
-
-<p id="790642" class="block-content"><tt>TTranslate</tt> can also perform string substitution.
-The <tt>Parameters</tt> property can be use to add name values pairs for substitution. Substrings in the translation enclosed with "{" and "}" are consider as the
- parameter names during substitution lookup. The following example will substitute the substring "{time}" with the value of the parameter attribute "<tt>Parameters.time=<%= time() %></tt>".
-<com:TTextHighlighter Language="prado" CssClass="source block-content" id="code_790214">
-<com:TTranslate Parameters.time=<%= time() %> >
-The time is {time}.
-</com:TTranslate>
-</com:TTextHighlighter>
-
-<p id="790643" class="block-content">A short for <tt>TTranslate</tt> is also provided using the following syntax.</p>
-<com:TTextHighlighter Language="prado" CssClass="source block-content" id="code_790215">
-<%[string]%>
-</com:TTextHighlighter>
-<p id="790644" class="block-content">where string will be translated to different languages according to the end-user's language preference. This syntax can be used with attribute values as well.</p>
-<com:TTextHighlighter Language="prado" CssClass="source block-content" id="code_790216">
-<com:TLabel Text="<%[ Hello World! ]%>" />
-</com:TTextHighlighter>
-
-<h2 id="6211">TDateFormat</h2>
-<p id="790645" class="block-content">Formatting localized date and time is straight forward.</p>
-<com:TTextHighlighter Language="prado" CssClass="source block-content" id="code_790217">
-<com:TDateFormat Value="12/01/2005" />
-</com:TTextHighlighter>
-
-<p id="790646" class="block-content">The <tt>Pattern</tt> property accepts 4 predefined localized date patterns and 4 predefined localized time patterns.</p>
-<ul id="u2" class="block-content">
- <li><tt>fulldate</tt></li>
- <li><tt>longdate</tt></li>
- <li><tt>mediumdate</tt></li>
- <li><tt>shortdate</tt></li>
- <li><tt>fulltime</tt></li>
- <li><tt>longtime</tt></li>
- <li><tt>mediumtime</tt></li>
- <li><tt>shorttime</tt></li>
-</ul>
-<p id="p1" class="block-content">
-The predefined can be used in any combination. If using a combined predefined pattern,
-the first pattern must be the date, followed by a space, and lastly the time pattern.
-For example, full date pattern with short time pattern. The actual ordering of the
-date-time and the actual pattern will be determine automatically from locale data specified
-by the <tt>Culture</tt> property.</p>
-
-<com:TTextHighlighter Language="prado" CssClass="source block-content" id="code_790218">
-<com:TDateFormat Pattern="fulldate shorttime" />
-</com:TTextHighlighter>
-
-<p id="790647" class="block-content">You can also specify a custom pattern using the following sub-patterns.
-The date/time format is specified by means of a string time pattern. In this pattern, all ASCII letters are reserved as pattern letters, which are defined as the following:
-<com:TTextHighlighter Language="text" CssClass="source block-content" id="code_790219">
- Symbol Meaning Presentation Example
- ------ ------- ------------ -------
- G era designator (Text) AD
- y year (Number) 1996
- M month in year (Text & Number) July & 07
- d day in month (Number) 10
- h hour in am/pm (1~12) (Number) 12
- H hour in day (0~23) (Number) 0
- m minute in hour (Number) 30
- s second in minute (Number) 55
- E day of week (Text) Tuesday
- D day in year (Number) 189
- F day of week in month (Number) 2 (2nd Wed in July)
- w week in year (Number) 27
- W week in month (Number) 2
- a am/pm marker (Text) PM
- k hour in day (1~24) (Number) 24
- K hour in am/pm (0~11) (Number) 0
- z time zone (Time) Pacific Standard Time
- ' escape for text (Delimiter) 'Date='
- '' single quote (Literal) 'o''clock'
-</com:TTextHighlighter>
-</p>
-
-<p id="790648" class="block-content">The count of pattern letters determine the format.</p>
-
-<p id="790649" class="block-content">(Text): 4 letters uses full form, less than 4, use short or abbreviated form
-if it exists. (e.g., "EEEE" produces "Monday", "EEE" produces "Mon")</p>
-
-<p id="790650" class="block-content">(Number): the minimum number of digits. Shorter numbers are zero-padded
- to this amount (e.g. if "m" produces "6", "mm" produces "06"). Year is
- handled specially; that is, if the count of 'y' is 2, the Year will be
- truncated to 2 digits. (e.g., if "yyyy" produces "1997", "yy" produces "97".)
- Unlike other fields, fractional seconds are padded on the right with zero.</p>
-
-<p id="790651" class="block-content">(Text and Number): 3 or over, use text, otherwise use number. (e.g.,
-"M" produces "1", "MM" produces "01", "MMM" produces "Jan", and "MMMM"
-produces "January".)</p>
-
-<p id="790652" class="block-content">Any characters in the pattern that are not in the ranges of ['a'..'z']
-and ['A'..'Z'] will be treated as quoted text. For instance, characters
-like ':', '.', ' ', and '@' will appear in the resulting time text
-even they are not embraced within single quotes.</p>
-
-<p id="790653" class="block-content">Examples using the US locale:
-
-<com:TTextHighlighter Language="text" CssClass="source block-content" id="code_790220">
-Format Pattern Result
--------------- -------
-"yyyy.MM.dd G 'at' HH:mm:ss" ->> 1996.07.10 AD at 15:08:56
-"EEE, MMM d, ''yy" ->> Wed, Jul 10, '96
-"h:mm a" ->> 12:08 PM
-"hh 'o''clock' a, z" ->> 12 o'clock PM, Pacific Daylight Time
-"K:mm a" ->> 0:00 PM
-"yyyy.MMMM.dd G hh:mm a" ->> 1996.July.10 AD 12:08 PM
-</com:TTextHighlighter>
-</p>
-
-<p id="790654" class="block-content">If the <tt>Value</tt> property is not specified, the current date and time is used.</p>
-
-<h2 id="6212">TNumberFormat</h2>
-<p id="790655" class="block-content">PRADO's Internationalization framework provide localized currency formatting and number formatting. Please note that the <tt>TNumberFormat</tt> component provides formatting only, it does not perform current conversion or exchange.</p>
-
-<p id="790656" class="block-content">Numbers can be formatted as currency, percentage, decimal or scientific
-numbers by specifying the <tt>Type</tt> attribute. The valid types are:</p>
-<ul id="u3" class="block-content">
- <li><tt>currency</tt></li>
- <li><tt>percentage</tt></li>
- <li><tt>decimal</tt></li>
- <li><tt>scientific</tt></li>
-</ul>
-
-<com:TTextHighlighter Language="prado" CssClass="source block-content" id="code_790221">
-<com:TNumberFormat Type="currency" Value="100" />
-</com:TTextHighlighter>
-
-<p id="790657" class="block-content"><tt>Culture</tt> and <tt>Currency</tt> properties may be specified to format locale specific numbers. </p>
-
-<p id="790658" class="block-content">If someone from US want to see sales figures from a store in
-Germany (say using the EURO currency), formatted using the german
- currency, you would need to use the attribute <tt>Culture="de_DE"</tt> to get
-the currency right, e.g. 100,00$. The decimal and grouping separator is
-then also from the <tt>de_DE</tt> locale. This may lead to some confusion because
-people from US uses the "," (comma) as thousand separator. Therefore a <tt>Currency</tt>
-attribute is available, so that the output from the following example results in $100.00
-<com:TTextHighlighter Language="prado" CssClass="source block-content" id="code_790222">
-<com:TNumberFormat Type="currency"
- Culture="en_US" Currency="EUR" Value="100" />
-</com:TTextHighlighter>
-</p>
-
-<p id="790659" class="block-content">The <tt>Pattern</tt> property determines the number of digits, thousand grouping
-positions, the number of decimal points and the decimal position. The actual characters that
-are used to represent the decimal points and thousand points are culture specific
-and will change automatically according to the <tt>Culture</tt> property. The valid
-<tt>Pattern</tt> characters are:</p>
-<ul id="u6" class="block-content">
- <li><tt># (hash)</tt> - represents the optional digits</li>
- <li><tt>0 (zero)</tt> - represents the mandatory digits, zero left filled</li>
- <li><tt>. (full stop)</tt> - the position of the decimal point (only 1 decimal point is allowed)</li>
- <li><tt>, (comma)</tt> - thousand point separation (up to 2 commas are allowed)</li>
-</ul>
-<p id="p2" class="block-content">
-For example, consider the <tt>Value="1234567.12345"</tt> and
-with <tt>Culture="en_US"</tt> (which uses "," for thousand point separator and "." for decimal separators).
-</p>
-<com:TTextHighlighter Language="text" CssClass="source block-content" id="code_790223">
-Pattern Output
-------- ------
-##,###.00 ->> 1,234,567.12
-##,###.## ->> 1,234,567.12345
-##,##.0000 ->> 1,23,45,67.1235
-##,###,##.0 ->> 12,345,67.1
-000,000,000.0 ->> 001,234,567.1
-</com:TTextHighlighter>
-</p>
-
-<h2 id="6213">TTranslateParameter</h2>
-<p id="790660" class="block-content">Compound messages, i.e., string substitution, can be accomplished with <tt>TTranslateParameter</tt>.
-In the following example, the strings "{greeting}" and "{name}" will be replace
-with the values of "Hello" and "World", respectively.The substitution string must be enclose with "{" and "}". The parameters can be further translated by using <tt>TTranslate</tt>.
-
-<com:TTextHighlighter Language="prado" CssClass="source block-content" id="code_790224">
-<com:TTranslate>
- {greeting} {name}!
- <com:TTranslateParameter Key="name">World</com:TTranslateParameter>
- <com:TTranslateParameter Key="greeting">Hello</com:TTranslateParameter>
-</com:TTranslate>
-</com:TTextHighlighter>
-
-
-<a name="choice-format"></a>
-<h2 id="6214">TChoiceFormat</h2>
-
-<p id="790661" class="block-content">Using the <tt>localize</tt> function or <tt>TTranslate</tt> component to translate messages does not inform the translator the cardinality of the data required to determine the correct plural structure to use. It only informs them that there is a variable data, the data could be anything. Thus, the translator will be unable to determine with respect to the substitution data the correct plural, language structure or phrase to use . E.g. in English, to translate the sentence, "There are {number} of apples.", the resulting translation should be different depending on the <tt>number</tt> of apples.</p>
-
-<p id="790662" class="block-content">The <tt>TChoiceFormat</tt> component performs message/string choice translation. The following example demonstrated a simple 2 choice message translation.</p>
-
-<com:TTextHighlighter Language="prado" CssClass="source block-content" id="code_790225">
-<com:TChoiceFormat Value="1"/>[1] One Apple. |[2] Two Apples</com:TChoiceFormat>
-</com:TTextHighlighter>
-
-<p id="790663" class="block-content">In the above example, the <tt>Value</tt> "1" (one), thus the translated string
-is "One Apple". If the <tt>Value</tt> was "2", then it will show "Two Apples".</p>
-
-<p id="790664" class="block-content">The message/string choices are separated by the pipe "|" followed by a set notation of the form.</p>
-<ul id="u7" class="block-content">
- <li><tt>[1,2]</tt> -- accepts values between 1 and 2, inclusive.</li>
- <li><tt>(1,2)</tt> -- accepts values between 1 and 2, excluding 1 and 2.</li>
- <li><tt>{1,2,3,4}</tt> -- only values defined in the set are accepted.</li>
- <li><tt>[-Inf,0)</tt> -- accepts value greater or equal to negative infinity
- and strictly less than 0</li>
-</ul>
-
-<p id="790665" class="block-content">Any non-empty combinations of the delimiters of square and round brackets are acceptable.
-The string chosen for display depends on the <tt>Value</tt> property. The <tt>Value</tt> is evaluated for each set until the <tt>Value</tt> is found to belong to a particular set.</p>
-
-
-</com:TContent>
diff --git a/demos/quickstart/protected/pages/Advanced/es/Logging.page b/demos/quickstart/protected/pages/Advanced/es/Logging.page deleted file mode 100755 index de67b5f6..00000000 --- a/demos/quickstart/protected/pages/Advanced/es/Logging.page +++ /dev/null @@ -1,61 +0,0 @@ -<com:TContent ID="body" >
-
-<h1 id="6101">Logging</h1>
-<p id="780615" class="block-content">
-PRADO provides a highly flexible and extensible logging functionality. Messages logged can be classified according to log levels and message categories. Using level and category filters, the messages can be further routed to different destinations, such as files, emails, browser windows, etc. The following diagram shows the basic architecture of PRADO logging mechanism,
-</p>
-<img src="<%~ logrouter.gif %>" alt="Log router" />
-
-<h2 id="6102">Using Logging Functions</h2>
-<p id="780616" class="block-content">
-The following two methods are provided for logging messages in PRADO,
-</p>
-<com:TTextHighlighter CssClass="source block-content" id="code_780201">
-Prado::log($message, $logLevel, $category);
-Prado::trace($message, $category);
-</com:TTextHighlighter>
-<p id="780617" class="block-content">
-The difference between <tt>Prado::log()</tt> and <tt>Prado::trace()</tt> is that the latter automatically selects the log level according to the application mode. If the application is in <tt>Debug</tt> mode, stack trace information is appended to the messages. <tt>Prado::trace()</tt> is widely used in the core code of the PRADO framework.
-</p>
-
-<h2 id="6103">Message Routing</h2>
-<p id="780618" class="block-content">
-Messages logged using the above two functions are kept in memory. To make use of the messages, developers need to route them to specific destinations, such as files, emails, or browser windows. The message routing is managed by <tt>System.Util.TLogRouter</tt> module. When plugged into an application, it can route the messages to different destination in parallel. Currently, PRADO provides three types of routes:
-</p>
-<ul id="u1" class="block-content">
- <li><tt>TFileLogRoute</tt> - filtered messages are stored in a specified log file. By default, this file is named <tt>prado.log</tt> under the runtime directory of the application. File rotation is provided.</li>
- <li><tt>TEmailLogRoute</tt> - filtered messages are sent to pre-specified email addresses.</li>
- <li><tt>TBrowserLogRoute</tt> - filtered messages are appended to the end of the current page output.</li>
-</ul>
-<p id="780619" class="block-content">
-To enable message routing, plug in and configure the <tt>TLogRouter</tt> module in application configuration,
-</p>
-<com:TTextHighlighter Language="xml" CssClass="source block-content" id="code_780202">
-<module id="log" class="System.Util.TLogRouter">
- <route class="TBrowserLogRoute"
- Levels="Info"
- Categories="System.Web.UI.TPage, System.Web.UI.WebControls" />
- <route class="TFileLogRoute"
- Levels="Warning, Error"
- Categories="System.Web" />
-</module>
-</com:TTextHighlighter>
-<p id="780620" class="block-content">
-In the above, the <tt>Levels</tt> and <tt>Categories</tt> specify the log and category filters to selectively retrieve the messages to the corresponding destinations.
-</p>
-
-<h2 id="6104">Message Filtering</h2>
-<p id="780621" class="block-content">
-Messages can be filtered according to their log levels and categories. Each log message is associated with a log level and a category. With levels and categories, developers can selectively retrieve messages that they are interested on.
-</p>
-<p id="780622" class="block-content">
-Log levels defined in <tt>System.Util.TLogger</tt> include : <tt>DEBUG</tt>, <tt>INFO</tt>, <tt>NOTICE</tt>, <tt>WARNING</tt>, <tt>ERROR</tt>, <tt>ALERT</tt>, <tt>FATAL</tt>. Messages can be filtered according log level criteria. For example, if a filter specifies <tt>WARNING</tt> and <tt>ERROR</tt> levels, then only those messages that are of <tt>WARNING</tt> and <tt>ERROR</tt> will be returned.
-</p>
-<p id="780623" class="block-content">
-Message categories are hierarchical. A category whose name is the prefix of another is said to be the ancestor category of the other category. For example, <tt>System.Web</tt> category is the ancestor of <tt>System.Web.UI</tt> and <tt>System.Web.UI.WebControls</tt> categories. Messages can be selectively retrieved using such hierarchical category filters. For example, if the category filter is <tt>System.Web</tt>, then all messages in the <tt>System.Web</tt> are returned. In addition, messages in the child categories, such as <tt>System.Web.UI.WebControls</tt>, are also returned.
-</p>
-<p id="780624" class="block-content">
-By convention, the messages logged in the core code of PRADO are categorized according to the namespace of the corresponding classes. For example, messages logged in <tt>TPage</tt> will be of category <tt>System.Web.UI.TPage</tt>.
-</p>
-
-</com:TContent>
diff --git a/demos/quickstart/protected/pages/Advanced/es/MasterContent.page b/demos/quickstart/protected/pages/Advanced/es/MasterContent.page deleted file mode 100755 index f99a64dc..00000000 --- a/demos/quickstart/protected/pages/Advanced/es/MasterContent.page +++ /dev/null @@ -1,57 +0,0 @@ -<com:TContent ID="body" >
-
-<h1 id="5801">Master and Content</h1>
-<p id="750587" class="block-content">
-Pages in a Web application often share common portions. For example, all pages of this tutorial application share the same header and footer portions. If we repeatedly put header and footer in every page source file, it will be a maintenance headache if in future we want to something in the header or footer. To solve this problem, PRADO introduces the concept of master and content. It is essentially a decorator pattern, with content being decorated by master.
-</p>
-<p id="750588" class="block-content">
-Master and content only apply to template controls (controls extending <tt>TTemplateControl</tt> or its child classes). A template control can have at most one master control and one or several contents (each represented by a <tt>TContent</tt> control). Contents will be inserted into the master control at places reserved by <tt>TContentPlaceHolder</tt> controls. And the presentation of the template control is that of the master control with <tt>TContentPlaceHolder</tt> replaced by <tt>TContent</tt>.
-</p>
-<p id="750589" class="block-content">
-For example, assume a template control has the following template:
-</p>
-<com:TTextHighlighter Language="prado" CssClass="source block-content" id="code_750192">
-<%@ MasterClass="MasterControl" %>
-<com:TContent ID="A" >
-content A
-</com:TContent >
-<com:TContent ID="B" >
-content B
-</com:TContent >
-<com:TContent ID="B" >
-content B
-</com:TContent >
-</com:TTextHighlighter>
-<p id="750590" class="block-content">
-which uses <tt>MasterControl</tt> as its master control. The master control has the following template,
-</p>
-<com:TTextHighlighter Language="prado" CssClass="source block-content" id="code_750193">
-other stuff
-<com:TContentPlaceHolder ID="A" />
-other stuff
-<com:TContentPlaceHolder ID="B" />
-other stuff
-<com:TContentPlaceHolder ID="C" />
-other stuff
-</com:TTextHighlighter>
-<p id="750591" class="block-content">
-Then, the contents are inserted into the master control according to the following diagram, while the resulting parent-child relationship can be shown in the next diagram. Note, the template control discards everything in the template other than the contents, while the master control keeps everything and replaces the content placeholders with the contents according to ID matching.
-</p>
-<img src=<%~ mastercontent.gif %> alt="Master and Content" />
-<img src=<%~ pcrelation.gif %> alt="Parent-child relationship between master and content" />
-
-<h2 id="6301">Master vs. External Template</h2>
-<p id="750592" class="block-content">
-Master is very similar to external templates which are introduced since version 3.0.5. A special <a href="?page=Configurations.Templates1">include tag</a> is used to include an external template file into a base template.
-</p>
-<p id="750593" class="block-content">
-Both master and external template can be used to share common contents among pages. A master is a template control whose template contains the common content and whose class file contains the logic associated with the master. An external template, on the other hand, is a pure template file without any class files.
-</p>
-<p id="750594" class="block-content">
-Therefore, use master control if the common content has to be associated with some logic, such as a page header with search box or login box. A master control allows you to specify how the common content should interact with end users. If you use external templates, you will have to put the needed logic in the page or control class who owns the base template.
-</p>
-<p id="750595" class="block-content">
-Performancewise, external template is lighter than master as the latter is a self-contained control participating the page lifecycles, while the former is used only when the template is being parsed.
-</p>
-
-</com:TContent>
diff --git a/demos/quickstart/protected/pages/Advanced/es/Performance.page b/demos/quickstart/protected/pages/Advanced/es/Performance.page deleted file mode 100755 index 7bdd4589..00000000 --- a/demos/quickstart/protected/pages/Advanced/es/Performance.page +++ /dev/null @@ -1,88 +0,0 @@ -<com:TContent ID="body" >
-
-<h1 id="6401">Performance Tuning</h1>
-<p id="810678" class="block-content">
-Performance of Web applications is affected by many factors. Database access, file system operations, network bandwidth are all potential affecting factors. PRADO tries in every effort to reduce the performance impact caused by the framework.
-</p>
-
-<h2 id="6402">Caching</h2>
-<p id="810679" class="block-content">
-PRADO provides a generic caching technique used by in several core parts of the framework. For example, when caching is enabled, <tt>TTemplateManager</tt> will save parsed templates in cache and reuse them in the following requests, which saves time for parsing templates. The <tt>TThemeManager</tt> adopts the similar strategy to deal with theme parsing.
-</p>
-<p id="810680" class="block-content">
-Enabling caching is very easy. Simply add the cache module in the application configuration, and PRADO takes care of the rest.
-</p>
-<com:TTextHighlighter Language="xml" CssClass="source block-content" id="code_810229">
-<modules>
- <module id="cache" class="System.Caching.TSqliteCache" />
-</modules>
-</com:TTextHighlighter>
-
-<p id="810681" class="block-content">
-Developers can also take advantage of the caching technique in their applications. The <tt>Cache</tt> property of <tt>TApplication</tt> returns the plugged-in cache module when it is available. To save and retrieve a data item in cache, use the following commands,
-</p>
-<com:TTextHighlighter CssClass="source block-content" id="code_810230">
-if($application->Cache) {
- // saves data item in cache
- $application->Cache->set($keyName,$dataItem);
- // retrieves data item from cache
- $dataItem=$application->Cache->get($keyName);
-}
-</com:TTextHighlighter>
-<p id="810682" class="block-content">
-where <tt>$keyName</tt> should be a string that uniquely identifies the data item stored in cache.
-</p>
-
-<p id="840059" class="block-content">
-Since v3.1.0, a new control called <a href="?page=Controls.OutputCache">TOutputCache</a> has been introduced. This control allows users to selectively cache parts of a page's output. When used appropriately, this technique can significant improve pages' performance because the underlying controls are not created at all if the cached versions are hit.
-</p>
-
-<h2 id="6403">Using <tt>pradolite.php</tt></h2>
-<p id="810683" class="block-content">
-Including many PHP script files may impact application performance significantly. PRADO classes are stored in different files and when processing a page request, it may require including tens of class files.To alleviate this problem, in each PRADO release, a file named <tt>pradolite.php</tt> is also included. The file is a merge of all core PRADO class files with comments being stripped off and message logging removed.
-</p>
-<p id="810684" class="block-content">
-To use <tt>pradolite.php</tt>, in your application entry script, replace the inclusion of <tt>prado.php</tt> with <tt>pradolite.php</tt>.
-</p>
-
-<h2 id="6404">Changing Application Mode</h2>
-<p id="810685" class="block-content">
-Application mode also affects application performance. A PRADO application can be in one of the following modes: <tt>Off</tt>, <tt>Debug</tt>, <tt>Normal</tt> and <tt>Performance</tt>. The <tt>Debug</tt> mode should mainly be used during application development, while <tt>Normal</tt> mode is usually used in early stage after an application is deployed to ensure everything works correctly. After the application is proved to work stably for some period, the mode can be switched to <tt>Performance</tt> to further improve the performance.
-</p>
-<p id="810686" class="block-content">
-The difference between <tt>Debug</tt>, <tt>Normal</tt> and <tt>Performance</tt> modes is that under <tt>Debug</tt> mode, application logs will contain debug information, and under <tt>Performance</tt> mode, timestamp checking is not performed for cached templates and published assets. Therefore, under <tt>Performance</tt> mode, application may not run properly if templates or assets are modified. Since <tt>Performance</tt> mode is mainly used when an application is stable, change of templates or assets are not likely.
-</p>
-<p id="810687" class="block-content">
-To switch application mode, configure it in application configuration:
-</p>
-<com:TTextHighlighter Language="xml" CssClass="source block-content" id="code_810231">
-<application Mode="Performance" >
- ......
-</application >
-</com:TTextHighlighter>
-
-<h2 id="6405">Reducing Page Size</h2>
-<p id="810688" class="block-content">
-By default, PRADO stores page state in hidden fields of the HTML output. The page state could be very large in size if complex controls, such as <tt>TDataGrid</tt>, is used. To reduce the size of the network transmitted page size, two strategies can be used.
-</p>
-<p id="810689" class="block-content">
-First, you may disable viewstate by setting <tt>EnableViewState</tt> to false for the page or some controls on the page if they do not need user interactions. Viewstate is mainly used to keep track of page state when a user interacts with that page/control.
-</p>
-<p id="810690" class="block-content">
-Second, you may use a different page state storage. For example, page state may be stored in session, which essentially stores page state on the server side and thus saves the network transmission time. The <tt>StatePersisterClass</tt> property of the page determines which state persistence class to use. By default, it uses <tt>System.Web.UI.TPageStatePersister</tt> to store persistent state in hidden fields. You may modify this property to a persister class of your own, as long as the new persister class implements the <tt>IPageStatePersister</tt> interface. You may configure this property in several places, such as application configuration or page configuration using <pages> or <page> tags,
-</p>
-<com:TTextHighlighter Language="xml" CssClass="source block-content" id="code_810232">
-<pages StatePersisterClass="MyPersister1" ... >
- <page ID="SpecialPage" StatePersisterClass="MyPersister2" ... />
-</pages>
-</com:TTextHighlighter>
-<p id="810691" class="block-content">
-Note, in the above the <tt>SpecialPage</tt> will use <tt>MyPersister2</tt> as its persister class, while the rest pages will use <tt>MyPersister1</tt>. Therefore, you can have different state persister strategies for different pages.
-</p>
-
-<h2 id="6406">Other Techniques</h2>
-<p id="810692" class="block-content">
-Server caching techniques are proven to be very effective in improving the performance of PRADO applications. For example, we have observed that by using Zend Optimizer, the RPS (request per second) of a PRADO application can be increased by more than ten times. Of course, this is at the cost of stale output, while PRADO's caching techniques always ensure the correctness of the output.
-</p>
-
-</com:TContent>
diff --git a/demos/quickstart/protected/pages/Advanced/es/Scripts.page b/demos/quickstart/protected/pages/Advanced/es/Scripts.page deleted file mode 100755 index cca6530e..00000000 --- a/demos/quickstart/protected/pages/Advanced/es/Scripts.page +++ /dev/null @@ -1,397 +0,0 @@ -<com:TContent ID="body" >
-<h1 id="6501">Introduction to Javascript</h1>
-This guide is based on the <a href="http://www.sergiopereira.com/articles/advjs.html">
-Quick guide to somewhat advanced JavaScript tour of some OO features</a> by Sergio Pereira.
-
-<h2 id="6502">Hey, I didn't know you could do that</h2>
-<p id="820693" class="block-content">
- If you are a web developer and come from the same place I do, you have probably
- used quite a bit of Javascript in your web pages, mostly as UI glue.
-</p>
-<p id="820694" class="block-content">
-
- Until recently, I knew that Javascript had more OO capabilities than I was employing,
- but I did not feel like I needed to use it. As the browsers started to support a more
- standardized featureset of Javascript and the DOM, it became viable to write more
- complex and functional code to run on the client. That helped giving birth to the
- AJAX phenomena.
-</p>
-<p id="820695" class="block-content">
- As we all start to learn what it takes to write our cool, AJAX applications, we begin
- to notice that the Javascript we used to know was really just the tip of the iceberg.
- We now see Javascript being used beyond simple UI chores like input validation and frivolous
- tasks. The client code now is far more advanced and layered, much like a real desktop
- application or a client-server thick client. We see class libraries, object models,
- hierarchies, patterns, and many other things we got used to seeing only in our server
- side code.
-</p>
-<p id="820696" class="block-content">
- In many ways we can say that suddenly the bar was put much higher than before. It takes
- a heck lot more proficiency to write applications for the new Web and we need to improve
- our Javascript skills to get there.
- If you try to use many of the existing javascript libraries out there, like
- <a href="http://prototype.conio.net/">Prototype.js</a>,
- <a href="http://script.aculo.us/">Scriptaculous</a>,
- <a href="http://moofx.mad4milk.net/">moo.fx</a>,
- <a href="http://bennolan.com/behaviour/">Behaviour</a>,
- <a href="http://developer.yahoo.net/yui/">YUI</a>,
- etc you'll eventually find yourself reading the JS code. Maybe because you want
- to learn how they do it, or because you're curious, or more often because that's the
- only way to figure out how to use it, since documentation does not seem to be highly
- regarded with most of these libraries. Whatever the case may be, you'll face some
- kung-fu techniques that will be foreign and scary if you haven't seen anything like
- that before.
-</p>
-
-<p id="820697" class="block-content">
- The purpose of this article is precisely explaining the types of constructs that
- many of us are not familiar with yet.
-</p>
-
-
-<h2 id="6503">JSON (JavaScript Object Notation)</h2>
-<p id="820698" class="block-content">
- JavaScript Object Notation (<a href="http://www.json.org/">JSON</a>,) is one of the new
- buzzwords popping up around the AJAX theme. JSON, simply put, is a way of
- declaring an object in Javascript. Let's see an example right away and note
- how simple it is.
-</p>
-<com:TTextHighlighter Language="javascript" CssClass="source block-content" id="code_820233">
-var myPet = { color: 'black', leg_count: 4, communicate: function(repeatCount){
-for(i=0;i<repeatCount;i++) alert('Woof!');} };
-</com:TTextHighlighter>
-
-<p id="820699" class="block-content">
- Let's just add little bit of formatting so it looks more like how we usually find out there:
-</p>
-<com:TTextHighlighter Language="javascript" CssClass="source block-content" id="code_820234">
-var myPet =
-{
- color: 'black',
- legCount: 4,
- communicate: function(repeatCount)
- {
- for(i=0;i<repeatCount;i++)
- alert('Woof!');
- }
-};
-</com:TTextHighlighter>
-<p id="820700" class="block-content">
- Here we created a reference to an object with two properties (<tt>color</tt>
- and <tt>legCount</tt>) and a method (<tt>communicate</tt>.)
- It's not hard to figure out that the object's properties and methods
- are defined as a comma delimited list. Each of the members is introduced by name, followed
- by a colon and then the definition. In the case of the properties it is easy, just the value
- of the property. The methods are created by assigning an anonymous function, which we will
- explain better down the line.
- After the object is created and assigned to the variable <tt>myPet</tt>,
- we can use it like this:
-</p>
-
-<com:TTextHighlighter Language="javascript" CssClass="source block-content" id="code_820235">
-alert('my pet is ' + myPet.color);
-alert('my pet has ' + myPet.legCount + ' legs');
-//if you are a dog, bark three times:
-myPet.communicate(3);
-</com:TTextHighlighter>
-<p id="820701" class="block-content">
- You'll see JSON used pretty much everywhere in JS these days, as arguments to functions,
- as return values, as server responses (in strings,) etc.
-</p>
-
-<h2 id="6504">What do you mean? A function is an object too?</h2>
-<p id="820702" class="block-content">
- This might be unusual to developers that never thought about that, but in JS a function is
- also an object. You can pass a function around as an argument to another function just like
- you can pass a string, for example. This is extensively used and very handy.
-</p>
-
-<p id="820703" class="block-content">
- Take a look at this example. We will pass functions to another function that will use them.
-</p>
-<com:TTextHighlighter Language="javascript" CssClass="source block-content" id="code_820236">
-var myDog =
-{
- bark: function()
- {
- alert('Woof!');
- }
-};
-
-var myCat =
-{
- meow: function()
- {
- alert('I am a lazy cat. I will not meow for you.');
- }
-};
-
-function annoyThePet(petFunction)
-{
- //let's see what the pet can do
- petFunction();
-}
-
-//annoy the dog:
-annoyThePet(myDog.bark);
-//annoy the cat:
-annoyThePet(myCat.meow);
-</com:TTextHighlighter>
-<p id="820704" class="block-content">
- Note that we pass myDog.bark and myCat.meow without appending parenthesis
- <tt>"()"</tt> to them. If we did that we would not be passing
- the function, rather we would be calling the method and passing the return value,
- <tt>undefined</tt> in both cases here.
-</p>
-
-<p id="820705" class="block-content">
- If you want to make my lazy cat start barking, you can easily do this:
-</p>
-<com:TTextHighlighter Language="javascript" CssClass="source block-content" id="code_820237">
-myCat.meow = myDog.bark;
-myCat.meow(); //alerts 'Woof!'
-</com:TTextHighlighter>
-
-<h2 id="6505">Arrays, items, and object members</h2>
-<p id="820706" class="block-content">
- The following two lines in JS do the same thing.
-</p>
-
-<com:TTextHighlighter Language="javascript" CssClass="source block-content" id="code_820238">
-var a = new Array();
-var b = [];
-</com:TTextHighlighter>
-<p id="820707" class="block-content">
- As I'm sure you already know, you can access individual items in an array
- by using the square brackets:
-</p>
-<com:TTextHighlighter Language="javascript" CssClass="source block-content" id="code_820239">
-var a = ['first', 'second', 'third'];
-var v1 = a[0];
-var v2 = a[1];
-var v3 = a[2];
-</com:TTextHighlighter>
-<p id="820708" class="block-content">
-
- But you are not limited to numeric indices. You can access any member of a JS
- object by using its name, in a string. The following example creates an empty
- object, and adds some members by name.
-</p>
-<com:TTextHighlighter Language="javascript" CssClass="source block-content" id="code_820240">
-var obj = {}; //new, empty object
-obj['member_1'] = 'this is the member value';
-obj['flag_2'] = false;
-obj['some_function'] = function(){ /* do something */};
-</com:TTextHighlighter>
-<p id="820709" class="block-content">
- The above code has identical effect as the following:
-</p>
-<com:TTextHighlighter Language="javascript" CssClass="source block-content" id="code_820241">
-var obj =
-{
- member_1:'this is the member value',
- flag_2: false,
- some_function: function(){ /* do something */}
-};
-</com:TTextHighlighter>
-
-<p id="820710" class="block-content">
- In many ways, the idea of objects and associative arrays (hashes) in JS are not
- distiguishable. The following two lines do the same thing too.
-</p>
-<com:TTextHighlighter Language="javascript" CssClass="source block-content" id="code_820242">
-obj.some_function();
-obj['some_function']();
-</com:TTextHighlighter>
-
-
-<h2 id="6506">Enough about objects, may I have a class now?</h2>
-<p id="820711" class="block-content">
-
- The great power of object oriented programming languages derive from the use
- of classes. I don't think I would have guessed how classes are defined in JS
- using only my previous experience with other languages. Judge for yourself.
-</p>
-<com:TTextHighlighter Language="javascript" CssClass="source block-content" id="code_820243">
-//defining a new class called Pet
-var Pet = function(petName, age)
-{
- this.name = petName;
- this.age = age;
-};
-
-//let's create an object of the Pet class
-var famousDog = new Pet('Santa\'s Little Helper', 15);
-alert('This pet is called ' + famousDog.name);
-</com:TTextHighlighter>
-<p id="820712" class="block-content">
- Let's see how we add a method to our <tt>Pet</tt> class. We will be using the
- <tt>prototype</tt> property that all classes have. The <tt>prototype</tt>
- property is an object that contains all the members that any object of the class will have.
- Even the default JS classes, like <tt>String</tt>, <tt>Number</tt>,
- and <tt>Date</tt> have a <tt>prototype</tt> object that we
- can add methods and properties to and make any object of that class automatically gain this new member.
-</p>
-
-<com:TTextHighlighter Language="javascript" CssClass="source block-content" id="code_820244">
-Pet.prototype.communicate = function()
-{
- alert('I do not know what I should say, but my name is ' + this.name);
-};
-</com:TTextHighlighter>
-<p id="820713" class="block-content">
- That's when a library like <a href="http://www.sergiopereira.com/articles/prototype.js.html">prototype.js</a> comes in
- handy. If we are using prototype.js, we can make our code look cleaner (at least in my opinion.)
-</p>
-<com:TTextHighlighter Language="javascript" CssClass="source block-content" id="code_820245">
-var Pet = Class.create();
-Pet.prototype =
-{
- //our 'constructor'
- initialize: function(petName, age)
- {
- this.name = petName;
- this.age = age;
- },
-
- communicate: function()
- {
- alert('I do not know what I should say, but my name is ' + this.name);
- }
-};
-</com:TTextHighlighter>
-
-<h2 id="6507">Functions as arguments, an interesting pattern</h2>
-<p id="820714" class="block-content">
- If you have never worked with languages that support closures
- you may find the following idiom too funky.
-</p>
-<com:TTextHighlighter Language="javascript" CssClass="source block-content" id="code_820246">
-var myArray = ['first', 'second', 'third'];
-myArray.each( function(item, index)
-{
- alert('The item in the position #' + index + ' is:' + item);
-});
-</com:TTextHighlighter>
-<p id="820715" class="block-content">
-
- Whoa! Let's explain what is going on here before you decide I've gone too
- far and navigate to a better article than this one.
-</p>
-<p id="820716" class="block-content">
- First of all, in the above example we are using the prototype.js library, which
- adds the each function to the Array class. The each function accepts one
- argument that is a function object. This function, in turn, will be called once
- for each item in the array, passing two arguments when called, the item and the index
- for the current item. Let's call this function our iterator function.
- We could have also written the code like this.
-</p>
-<com:TTextHighlighter Language="javascript" CssClass="source block-content" id="code_820247">
-function myIterator(item, index)
-{
- alert('The item in the position #' + index + ' is:' + item);
-}
-
-var myArray = ['first', 'second', 'third'];
-myArray.each( myIterator );
-</com:TTextHighlighter>
-<p id="820717" class="block-content">
- But then we would not be doing like all the cool kids in school, right?
- More seriously, though, this last format is simpler to understand but causes
- us to jump around in the code looking for the myIterator function. It's nice
- to have the logic of the iterator function right there in the same place
- it's called. Also, in this case, we will not need the iterator function anywhere
- else in our code, so we can transform it into an anonymous function without penalty.
-</p>
-
-<h2 id="6508">This is <tt>this</tt> but sometimes <tt>this</tt> is also that</h2>
-<p id="820718" class="block-content">
-
- One of the most common troubles we have with JS when we start writing our code
- it the use of the <tt>this</tt> keyword. It could be a real
- tripwire.
-</p>
-<p id="820719" class="block-content">
- As we mentioned before, a function is also an object in JS, and sometimes we
- do not notice that we are passing a function around.
-</p>
-<p id="820720" class="block-content">
- Take this code snippet as an example.
-</p>
-<com:TTextHighlighter Language="javascript" CssClass="source block-content" id="code_820248">
-function buttonClicked()
-{
- alert('button ' + this.id + ' was clicked');
-}
-
-var myButton = document.getElementById('someButtonID');
-var myButton2 = document.getElementById('someOtherButtonID');
-myButton.onclick = buttonClicked;
-myButton2.onclick = buttonClicked;
-</com:TTextHighlighter>
-<p id="820721" class="block-content">
- Because the buttonClicked function is defined outside any object we may tend to
- think the <tt>this</tt> keyword will contain a reference to
- the <tt>window</tt> or <tt>document</tt>
- object (assuming this code is in the middle of an HTML page viewed in a browser.)
-</p>
-
-<p id="820722" class="block-content">
- But when we run this code we see that it works as intended and displays the <tt>id</tt> of
- the clicked button. What happened here is that we made the onclick method of each button contain the
- <tt>buttonClicked</tt> object reference, replacing whatever was there before. Now
- whenever the button is clicked, the browser will execute something similar to the following line.
-</p>
-<com:TTextHighlighter Language="javascript" CssClass="source block-content" id="code_820249">
-myButton.onclick();
-</com:TTextHighlighter>
-<p id="820723" class="block-content">
-
- That isn't so confusing afterall, is it? But see what happens you start having other
- objects to deal with and you want to act on these object upon events like the button's click.
-</p>
-<com:TTextHighlighter Language="javascript" CssClass="source block-content" id="code_820250">
-var myHelper =
-{
- formFields: [ ],
- emptyAllFields: function()
- {
- for(i=0; i < this.formFields.length; i++)
- {
- var elementID = this.formFields[i];
- var field = document.getElementById(elementID);
- field.value = '';
- }
- }
-};
-
-//tell which form fields we want to work with
-myHelper.formFields.push('txtName');
-myHelper.formFields.push('txtEmail');
-myHelper.formFields.push('txtAddress');
-
-//clearing the text boxes:
-myHelper.emptyAllFields();
-
-var clearButton = document.getElementById('btnClear');
-clearButton.onclick = myHelper.emptyAllFields;
-</com:TTextHighlighter>
-<p id="820724" class="block-content">
- So you think, nice, now I can click the Clear button on my page and those three text boxes
- will be emptied. Then you try clicking the button only to get a runtime error. The error
- will be related to (guess what?) the <tt>this</tt> keyword.
- The problem is that <tt>this.formFields</tt> is not defined if
- <tt>this</tt> contains a referece to the button, which is
- precisely what's happening. One quick solution would be to rewrite our last line of code.
-</p>
-
-<com:TTextHighlighter Language="javascript" CssClass="source block-content" id="code_820251">
-clearButton.onclick = function()
-{
- myHelper.emptyAllFields();
-};
-</com:TTextHighlighter>
-<p id="820725" class="block-content">
- That way we create a brand new function that calls our helper method within the helper object's context.
-</p>
-</com:TContent>
diff --git a/demos/quickstart/protected/pages/Advanced/es/Scripts3.page b/demos/quickstart/protected/pages/Advanced/es/Scripts3.page deleted file mode 100755 index 37885abb..00000000 --- a/demos/quickstart/protected/pages/Advanced/es/Scripts3.page +++ /dev/null @@ -1,39 +0,0 @@ -<com:TContent ID="body" >
-<h1 id="6801">Javascript in PRADO, Questions and Answers</h1>
-<h2 id="6802">How do I include the Javascript libraries distributed with Prado?</h2>
-<p id="880060" class="block-content">The javascript libraries distributed with Prado can be found in the
-<tt>framework/Web/Javascripts/source</tt> directory. The <tt>packages.php</tt>
-file in that directory defines a list of available package names available
-to be loaded. They can be loaded as follows.
-</p>
-<ul id="u1" class="block-content"><li>Adding libraries in the template
-<com:TTextHighlighter Language="prado" CssClass="source block-content" id="code_850268">
-<com:TClientScript PradoScripts="effects" />
-</com:TTextHighlighter>
- </li>
- <li>Adding libraries in PHP code
- <com:TTextHighlighter Language="php" CssClass="source block-content" id="code_850269">
-$this->getPage()->getClientScript()->registerPradoScript("effects");
- </com:TTextHighlighter>
- </li>
-</ul>
-The available packaged libraries included in Prado are
-<ul id="u2" class="block-content">
- <li><tt>prado</tt> : basic PRADO javascript framework based on Prototype</li>
- <li><tt>effects</tt> : visual effects from script.aculo.us</li>
- <li><tt>ajax</tt> : ajax and callback related based on Prototype</li>
- <li><tt>validator</tt> : validation</li>
- <li><tt>logger</tt> : javascript logger and object browser</li>
- <li><tt>datepicker</tt> : datepicker</li>
- <li><tt>colorpicker</tt> : colorpicker</li>
-</ul>
-
-<p id="850761" class="block-content">The dependencies for each library are automatically resolved. Components
-that require a particular library will also automatically load the necessary libraries.
-For example, if you add a <tt>TDatePicker</tt> component on the page, the <tt>datepicker</tt>
-and its dependencies will be automatically included on the page.</p>
-
-<p id="850762" class="block-content">See <a href="?page=Controls.ClientScript">TClientScript</a> for options of adding
- your custom Javascript code to the page.</p>
-
-</com:TContent>
diff --git a/demos/quickstart/protected/pages/Advanced/es/Security.page b/demos/quickstart/protected/pages/Advanced/es/Security.page deleted file mode 100755 index c3d0b511..00000000 --- a/demos/quickstart/protected/pages/Advanced/es/Security.page +++ /dev/null @@ -1,79 +0,0 @@ -<com:TContent ID="body" >
-
-<h1 id="5601">Security</h1>
-
-<h2 id="5602">Viewstate Protection</h2>
-<p id="730563" class="block-content">
-Viewstate lies at the heart of PRADO. Viewstate represents data that can be used to restore pages to the state that is last seen by end users before making the current request. By default, PRADO uses hidden fields to store viewstate information.
-</p>
-<p id="730564" class="block-content">
-It is extremely important to ensure that viewstate is not tampered by end users. Without protection, malicious users may inject harmful code into viewstate and unwanted instructions may be performed when page state is being restored on server side.
-</p>
-<p id="730565" class="block-content">
-To prevent viewstate from being tampered, PRADO enforces viewstate HMAC (Keyed-Hashing for Message Authentication) check before restoring viewstate. Such a check can detect if the viewstate has been tampered or not by end users. Should the viewstate is modified, PRADO will stop restoring the viewstate and return an error message.
-</p>
-<p id="730566" class="block-content">
-HMAC check requires a private key that should be secret to end users. Developers can either manually specify a key or let PRADO automatically generate a key. Manually specified key is useful when the application runs on a server farm. To do so, configure <tt>TSecurityManager</tt> in application configuration,
-</p>
-<com:TTextHighlighter Language="xml" CssClass="source block-content" id="code_730186">
-<modules>
- <module id="security"
- class="TSecurityManager"
- ValidationKey="my private key" />
-</modules>
-</com:TTextHighlighter>
-<p id="730567" class="block-content">
-HMAC check does not prevent end users from reading the viewstate content. An added security measure is to encrypt the viewstate information so that end users cannot decipher it. To enable viewstate encryption, set the <tt>EnableStateEncryption</tt> of pages to true. This can be done in <a href="?page=Configurations.PageConfig">page configurations</a> or in page code. Note, encrypting viewstate may degrade the application performance. A better strategy is to store viewstate on the server side, rather than the default hidden field.
-</p>
-
-<h2 id="5603">Cross Site Scripting Prevention</h2>
-<p id="730568" class="block-content">
-Cross site scripting (also known as XSS) occurs when a web application gathers malicious data from a user. Often attackers will inject JavaScript, VBScript, ActiveX, HTML, or Flash into a vulnerable application to fool other application users and gather data from them. For example, a poorly design forum system may display user input in forum posts without any checking. An attacker can then inject a piece of malicious JavaScript code into a post so that when other users read this post, the JavaScript runs unexpectedly on their computers.
-</p>
-<p id="730569" class="block-content">
-One of the most important measures to prevent XSS attacks is to check user input before displaying them. One can do HTML-encoding with the user input to achieve this goal. However, in some situations, HTML-encoding may not be preferable because it disables all HTML tags.
-</p>
-<p id="730570" class="block-content">
-PRADO incorporates the work of <a href="http://pixel-apes.com/safehtml/">SafeHTML</a> and provides developers with a useful component called <tt>TSafeHtml</tt>. By enclosing content within a <tt>TSafeHtml</tt> component tag, the enclosed content are ensured to be safe to end users. In addition, the commonly used <tt>TTextBox</tt> has a <tt>SafeText</tt> property which contains user input that are ensured to be safe if displayed directly to end users.
-</p>
-
-<h2 id="5604">Cookie Attack Prevention</h2>
-<p id="730571" class="block-content">
-Protecting cookies from being attacked is of extreme important, as session IDs are commonly stored in cookies. If one gets hold of a session ID, he essentially owns all relevant session information.
-</p>
-<p id="730572" class="block-content">
-There are several countermeasures to prevent cookies from being attacked.
-</p>
-<ul id="u1" class="block-content">
- <li>An application can use SSL to create a secure communication channel and only pass the authentication cookie over an HTTPS connection. Attackers are thus unable to decipher the contents in the transferred cookies.</li>
- <li>Expire sessions appropriately, including all cookies and session tokens, to reduce the likelihood of being attacked.</li>
- <li>Prevent cross-site scripting (XSS) which causes arbitrary code to run in a user's browser and expose his cookies.</li>
- <li>Validate cookie data and detect if they are altered.</li>
-</ul>
-<p id="730573" class="block-content">
-PRADO implements a cookie validation scheme that prevents cookies from being modified. In particular, it does HMAC check for the cookie values if cookie validation is enable.
-</p>
-<p id="730574" class="block-content">
-Cookie validation is disabled by default. To enable it, configure the <tt>THttpRequest</tt> module as follows,
-</p>
-<com:TTextHighlighter Language="xml" CssClass="source block-content" id="code_730187">
-<modules>
- <module id="request" class="THttpRequest" EnableCookieValidation="true" />
-</modules>
-</com:TTextHighlighter>
-<p id="730575" class="block-content">
-To make use of cookie validation scheme provided by PRADO, you also need to retrieve cookies through the <tt>Cookies</tt> collection of <tt>THttpRequest</tt> by using the following PHP statements,
-</p>
-<com:TTextHighlighter CssClass="source block-content" id="code_730188">
-foreach($this->Request->Cookies as $cookie)
- // $cookie is of type THttpCookie
-</com:TTextHighlighter>
-<p id="730576" class="block-content">
-To send cookie data encoded with validation information, create new <tt>THttpCookie</tt> objects and add them to the <tt>Cookies</tt> collection of <tt>THttpResponse</tt>,
-</p>
-<com:TTextHighlighter CssClass="source block-content" id="code_730189">
-$cookie=new THttpCookie($name,$value);
-$this->Response->Cookies[]=$cookie;
-</com:TTextHighlighter>
-
-</com:TContent>
diff --git a/demos/quickstart/protected/pages/Advanced/es/State.page b/demos/quickstart/protected/pages/Advanced/es/State.page deleted file mode 100755 index c43a9dff..00000000 --- a/demos/quickstart/protected/pages/Advanced/es/State.page +++ /dev/null @@ -1,54 +0,0 @@ -<com:TContent ID="body" >
-
-<h1 id="6001">Persistent State</h1>
-<p id="770606" class="block-content">
-Web applications often need to remember what an end user has done in previous page requests so that the new page request can be served accordingly. State persistence is to address this problem. Traditionally, if a page needs to keep track of user interactions, it will resort to session, cookie, or hidden fields. PRADO provides a new line of state persistence schemes, including view state, control state, and application state.
-</p>
-
-<h2 id="6002">View State</h2>
-<p id="770607" class="block-content">
-View state lies at the heart of PRADO. With view state, Web pages become stateful and are capable of restoring pages to the state that end users interacted with before the current page request. Web programming thus resembles to Windows GUI programming, and developers can think continuously without worrying about the round trips between end users and the Web server. For example, with view state, a textbox control is able to detect if the user input changes the content in the textbox.
-</p>
-<p id="770608" class="block-content">
-View state is only available to controls. View state of a control can be disabled by setting its <tt>EnableViewState</tt> property to false. To store a variable in view state, call the following,
-</p>
-<com:TTextHighlighter CssClass="source block-content" id="code_770197">
-$this->setViewState('Caption',$caption);
-</com:TTextHighlighter>
-<p id="770609" class="block-content">
-where <tt>$this</tt> refers to the control object, <tt>Caption</tt> is a unique key identifying the <tt>$caption</tt> variable stored in viewstate. To retrieve the variable back from view state, call the following,
-</p>
-<com:TTextHighlighter CssClass="source block-content" id="code_770198">
-$caption = $this->getViewState('Caption');
-</com:TTextHighlighter>
-
-<h2 id="6003">Control State</h2>
-<p id="770610" class="block-content">
-Control state is like view state in every aspect except that control state cannot be disabled. Control state is intended to be used for storing crucial state information without which a page or control may not work properly.
-</p>
-<p id="770611" class="block-content">
-To store and retrieve a variable in control state, use the following commands,
-</p>
-<com:TTextHighlighter CssClass="source block-content" id="code_770199">
-$this->setControlState('Caption',$caption);
-$caption = $this->getControlState('Caption');
-</com:TTextHighlighter>
-
-<h2 id="6004">Application State</h2>
-<p id="770612" class="block-content">
-Application state refers to data that is persistent across user sessions and page requests. A typical example of application state is the user visit counter. The counter value is persistent even if the current user session terminates. Note, view state and control state are lost if the user requests for a different page, while session state is lost if the user session terminates.
-</p>
-<p id="770613" class="block-content">
-To store and retrieve a variable in application state, use the following commands,
-</p>
-<com:TTextHighlighter CssClass="source block-content" id="code_770200">
-$application->setGlobalState('Caption',$caption);
-$caption = $application->getGlobalState('Caption');
-</com:TTextHighlighter>
-
-<h2 id="6005">Session State</h2>
-<p id="770614" class="block-content">
-PRADO encapsulates the traditional session management in <tt>THttpSession</tt> module. The module can be accessed from within any component by using <tt>$this->Session</tt>, where <tt>$this</tt> refers to the component object.
-</p>
-
-</com:TContent>
diff --git a/demos/quickstart/protected/pages/Advanced/es/Themes.page b/demos/quickstart/protected/pages/Advanced/es/Themes.page deleted file mode 100755 index 4e440ce5..00000000 --- a/demos/quickstart/protected/pages/Advanced/es/Themes.page +++ /dev/null @@ -1,60 +0,0 @@ -<com:TContent ID="body" >
-
-<h1 id="5901">Themes and Skins</h1>
-
-<h2 id="5902">Introduction</h2>
-<p id="760596" class="block-content">
-Themes in PRADO provide a way for developers to provide a consistent look-and-feel across an entire web application. A theme contains a list of initial values for properties of various control types. When applying a theme to a page, all controls on that page will receive the corresponding initial property values from the theme. This allows themes to interact with the rich property sets of the various PRADO controls, meaning that themes can be used to specify a large range of presentational properties that other theming methods (e.g. CSS) cannot. For example, themes could be used to specify the default page size of all data grids across an application by specifying a default value for the <tt>PageSize</tt> property of the <tt>TDataGrid</tt> control.
-</p>
-
-<h2 id="5903">Understanding Themes</h2>
-<p id="760597" class="block-content">
-A theme is a directory consists of skin files, javascript files and CSS files. Any javascript or CSS files contained in a theme will be registered with the page that the theme is applied to. A skin is a set of initial property values for a particular control type. A control type may have one or several skins, each identified by a unique <tt>SkinID</tt>. When applying a theme to a page, a skin is applied to a control if the control type and the <tt>SkinID</tt> value both match to those of the skin. Note, if a skin has an empty <tt>SkinID</tt> value, it will apply to all controls of the particular type whose <tt>SkinID</tt> is not set or empty. A skin file consists of one or several skins, for one or several control types. A theme is the union of skins defined in all skin files.
-</p>
-
-<h2 id="5904">Using Themes</h2>
-<p id="760598" class="block-content">
-To use a theme, you need to set the <tt>Theme</tt> property of the page with the theme name, which is the theme directory name. You may set it in either <a href="?page=Configurations.PageConfig">page configurations</a> or in the constructor or <tt>onPreInit()</tt> method of the page. You cannot set the property after <tt>onPreInit()</tt> because by that time, child controls of the page are already created (skins must be applied to controls right after they are created.)
-</p>
-<p id="760599" class="block-content">
-To use a particular skin in the theme for a control, set <tt>SkinID</tt> property of the control in template like following,
-</p>
-<com:TTextHighlighter Language="prado" CssClass="source block-content" id="code_760194">
-<com:TButton SkinID="Blue" ... />
-</com:TTextHighlighter>
-<p id="760600" class="block-content">
-This will apply the 'Blue' skin to the button. Note, the initial property values specified by the 'Blue' skin will overwrite any existing property values of the button. Use stylesheet theme if you do not want them to be overwritten. To use stylesheet theme, set the <tt>StyleSheetTheme</tt> property of the page instead of <tt>Theme</tt> (you can have both <tt>StyleSheetTheme</tt> and <tt>Theme</tt>).
-</p>
-<p id="760601" class="block-content">
-To use the Javascript files and CSS files contained in a theme, a <tt>THead</tt> control must be placed on the page template. This is because the theme will register those files with the page and <tt>THead</tt> is the right place to load those files.
-</p>
-<p id="760602" class="block-content">
-It is possible to specify media types of CSS files contained in a theme. By default, a CSS file applies to all media types. If the CSS file is named like <tt>mystyle.print.css</tt>, it will be applied only to <tt>print</tt> media type. As another example, <tt>mystyle.screen.css</tt> applies to <tt>screen</tt> media only, and <tt>mystyle.css</tt> applies to all media types.
-</p>
-
-<h2 id="5905">Theme Storage</h2>
-<p id="760603" class="block-content">
-All themes by default must be placed under the <tt>[AppEntryPath]/themes</tt> directory, where <tt>AppEntryPath</tt> refers to the directory containing the application entry script. If you want to use a different directory, configure the <tt>BasePath</tt> and <tt>BaseUrl</tt> properties of the <tt>System.Web.UI.TThemeManager</tt> module in application configuration,
-</p>
-<com:TTextHighlighter Language="xml" CssClass="source block-content" id="code_760195">
-<service id="page" class="TPageService">
- <modules>
- <module id="theme"
- class="System.Web.UI.TThemeManager"
- BasePath="mythemes"
- BaseUrl="mythemes" />
- </modules>
-</service>
-</com:TTextHighlighter>
-
-<h2 id="5906">Creating Themes</h2>
-<p id="760604" class="block-content">
-Creating a theme involves creating the theme directory and writing skin files (and possibly Javascript and CSS files). The name of skin files must be terminated with <tt>.skin</tt>. The format of skin files are the same as that of control template files. Since skin files do not define parent-child presentational relationship among controls, you cannot place a component tag within another. And any static texts between component tags are discarded. To define the aforementioned 'Blue' skin for <tt>TButton</tt>, write the following in a skin file,
-</p>
-<com:TTextHighlighter Language="prado" CssClass="source block-content" id="code_760196">
-<com:TButton SkinID="Blue" BackColor="blue" />
-</com:TTextHighlighter>
-<p id="760605" class="block-content">
-As aforementioned, you can put several skins within a single skin file, or split them into several files. A commonly used strategy is that each skin file only contains skins for one type of controls. For example, <tt>Button.skin</tt> would contain skins only for the <tt>TButton</tt> control type.
-</p>
-</com:TContent>
diff --git a/demos/quickstart/protected/pages/Advanced/es/exception.gif b/demos/quickstart/protected/pages/Advanced/es/exception.gif Binary files differdeleted file mode 100755 index 93b1a07f..00000000 --- a/demos/quickstart/protected/pages/Advanced/es/exception.gif +++ /dev/null diff --git a/demos/quickstart/protected/pages/Advanced/es/exception2.gif b/demos/quickstart/protected/pages/Advanced/es/exception2.gif Binary files differdeleted file mode 100755 index 5fe0e625..00000000 --- a/demos/quickstart/protected/pages/Advanced/es/exception2.gif +++ /dev/null diff --git a/demos/quickstart/protected/pages/Advanced/es/logrouter.gif b/demos/quickstart/protected/pages/Advanced/es/logrouter.gif Binary files differdeleted file mode 100755 index 5a74dfe1..00000000 --- a/demos/quickstart/protected/pages/Advanced/es/logrouter.gif +++ /dev/null diff --git a/demos/quickstart/protected/pages/Advanced/es/mastercontent.gif b/demos/quickstart/protected/pages/Advanced/es/mastercontent.gif Binary files differdeleted file mode 100755 index 9354d65c..00000000 --- a/demos/quickstart/protected/pages/Advanced/es/mastercontent.gif +++ /dev/null diff --git a/demos/quickstart/protected/pages/Advanced/es/pcrelation.gif b/demos/quickstart/protected/pages/Advanced/es/pcrelation.gif Binary files differdeleted file mode 100755 index c1960d74..00000000 --- a/demos/quickstart/protected/pages/Advanced/es/pcrelation.gif +++ /dev/null |
